Operation Delta 3 - 009
Page 1 of 6 123 ... LastLast
Results 1 to 15 of 76

Thread: Operation Delta 3 - 009

  1. #1
    Join Date
    Oct 2000
    Location
    graham, tx, us
    Posts
    7,156

    Operation Delta 3 - 009

    Operation Delta 3 - 009 begins. We are in the middle of working with Compaq computers and their BOMID and sarkazztic is running somes tests on his computer. This is taking up the time while waiting on all the components for BT, an Operation Delta computer, to come in.

    For all the Delta crew, please remember, I have never had DOS so when you say to do something I probably don't know the mechanics of procedure. I sorta like need it spelled out as in Step 1, Step 2 etc. That is why it takes me longer to go through say Jaak's suggestions. I do not key something unless I know why. I learned that the hard way.

    Operation Delta - 3 - 008 http://discussions.virtualdr.com/For...ML/005351.html


    ------------------
    Seek knowledge and all else will follow


    Please post back results - Press Ctl D to bookmark

    Information

    [This message has been edited by Murf (edited 10-03-2001).]

  2. #2
    Join Date
    Jul 2000
    Location
    N. Virginia--Wash DC area
    Posts
    10,685
    Honestly, at this point I'd be tossing Compaq and that *&$# BOMID off the highest point over the Grand Canyon right about now...Would have to wait a while, but the sound of it hitting bottom would be quite pleasant.
    Desktop: Intel i7 960 CPU @ 4.0GHz, EVGA Classified 4-Way SLI mobo, 12GB Corsair Dominator-GT 2000 DDR3 RAM, Crucial RealSSD C300 256GB Solid State Drive, Two WD 2TB SATA drives, 2x EVGA GTX 570 Superclocked graphics cards in SLI, Coolermaster HAF X full tower case, OCZ ZX 1250w PSU, Corsair H100 CPU Cooler
    Laptop: MSI GT60-004US, 2x Seagate Momentus XT 750GB SSD Hybrid drives in RAID 0, 16GB DDR3 1600 RAM, GeForce 670M 3GB graphics card, Networks 'Killer' N-1103 WLAN card

  3. #3
    Join Date
    Oct 2000
    Location
    graham, tx, us
    Posts
    7,156
    OK When ya wanna leave?

    ------------------
    Seek knowledge and all else will follow


    Please post back results - Press Ctl D to bookmark

    Information

  4. #4
    Join Date
    Mar 2000
    Location
    Center of my own universe
    Posts
    3,734
    unconfusiuorisation where did I put that dictionary...
    sarrkazztic
    You probably lost it in the barnyard over at Boardman. They only have 7000 milking cows.

    ummm Train did I do something to irritate you? I have not been to boardman in a couple years...and those cows promised they would not tell...
    I have been impressed with the urgency of doing. Knowing is not enough; we must apply. Being willing is not enough; we must do.Leonardo da Vinci



    Tesla's Fansite

  5. #5
    Join Date
    Oct 2000
    Posts
    1,313
    You seen that UPS man today Goose?

    Lesser...hmmm alright, bistro... I'll accept that. Just thought I might be needin' to "upgrade".

    I'm fixing to practice my hernial grimmace, sarrkazztic.




  6. #6
    Join Date
    Apr 2000
    Location
    Sheboygan, WI
    Posts
    53,391
    The darn cows where on tv this morning, even showing off their carosel. Blabbermouth reporter.

    ------------------
    SMILE
    and post back
    [ Book mark this post to find it again]

  7. #7
    Join Date
    Mar 2000
    Location
    Center of my own universe
    Posts
    3,734
    I dont even want to know what a herial grimmace is......Howdy Queen O Hearts....I seen some pictures of your sweet machine...over on a case mods site....very nice litte window......by the way I read the specs of the machine very nice and a fine job you did on your first one....have you done any upgrading to I believe it was your sisters machine....angel of mercy or something like that...Give us an update since we are somewhat celebrating your success and anticipating Goose's success as well......Here is my nightly update....the Celeron machine is running very nice after I flashed the bios with the latest version...still no go on the ultra66 card but I called promise and they said it was an oem card and only designed to work in 1 certain machine....glad the vendor I bought if from told me that... <gotta love the smiley that is named after me> any way I only paid 15.00 for the card with shipping so the world is not going to end but I could have used that money to buy a better hsf for the Celeron machine....I would not trade the farm or the cows for the vantec hsf that I have on the Athlon and as for that machine it is the nicest machine that I have built to date....I love it...still havent convinced the wife to let me cut any holes in that antec case for a blowhole or a windows...and dont think she will ever give in since she paid for the case... I have to get some games on the celeron machine so I can play.....where did I put that MYST cd......and if you say one more word about those cows in boardman.....
    I have been impressed with the urgency of doing. Knowing is not enough; we must apply. Being willing is not enough; we must do.Leonardo da Vinci



    Tesla's Fansite

  8. #8
    Join Date
    Apr 2000
    Location
    Sheboygan, WI
    Posts
    53,391
    Queen_of_Hearts
    He found evidence a ups person had been there. 98SE upgrade. And a little help to get it installed. Some programs, that sort of thing. In a goodies box no less

    ------------------
    SMILE
    and post back
    [ Book mark this post to find it again]

  9. #9
    Join Date
    Oct 2000
    Posts
    1,313
    No upgrades on Texas Angels machine. She's really anxious... but NSF. You musta read the Original Delta threads. I still get a kick when I look back thru them for some twick or tweak. It was a blast building this machine, thanks to these guys.
    No problems with this one at all. Praying goose is just a fortunate.

    Gettin' close goose. I'm watching.

  10. #10
    Join Date
    Jan 2001
    Location
    Allegheny County,PA, USA
    Posts
    4,033
    Somebody say MYST...........

    MYST 3 ought to be listed as a low level virus at Symantec.

    You guys realize how much money and aggravation that thing has cost me?

    ***maxx rips out what's left of his hair***

    ------------------
    Hell hath no fury like a computer scorned.

    MAXXIMILIAN'S

  11. #11
    Join Date
    Apr 2000
    Location
    Sheboygan, WI
    Posts
    53,391
    2 computers at least wasn't Maxx?

    ------------------
    SMILE
    and post back
    [ Book mark this post to find it again]

  12. #12
    Join Date
    Jan 2001
    Location
    Allegheny County,PA, USA
    Posts
    4,033
    I can't talk about it...sniff...it's just too painful.

    And the damn thing still doesn't work...that's the real kick in the head.

    ------------------
    Hell hath no fury like a computer scorned.

    MAXXIMILIAN'S

  13. #13
    Join Date
    Mar 2000
    Location
    Center of my own universe
    Posts
    3,734
    I am reading the original deltas Queenie...I am up to about 21 or 22 I think....been side tracked with building and testing and pulliing hair out in the last few weeks...wish I had never heard the words promise + ultra66 + PROPRIETARY = pain in my mobo.
    I have been impressed with the urgency of doing. Knowing is not enough; we must apply. Being willing is not enough; we must do.Leonardo da Vinci



    Tesla's Fansite

  14. #14
    Join Date
    Oct 2000
    Posts
    1,313
    Hi Train and Maxx !


    PROPRIETARY ! Ohhh ! careful using that kind of language, sarrkazztic....you'll get edited !




  15. #15
    Join Date
    Mar 2000
    Location
    Center of my own universe
    Posts
    3,734
    Queenie you have to quit talking in italics I get all excited


    See what I mean it took me 3 times to get that right.
    [This message has been edited by sarrkazztic (edited 10-04-2001).]

    [This message has been edited by sarrkazztic (edited 10-04-2001).]

    [This message has been edited by sarrkazztic (edited 10-04-2001).]

    [This message has been edited by sarrkazztic (edited 10-04-2001).]
    I have been impressed with the urgency of doing. Knowing is not enough; we must apply. Being willing is not enough; we must do.Leonardo da Vinci



    Tesla's Fansite

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •