Thank you for helping Liam

The motherboard I purchased was a ASRock PV4M800 the spec's are listed below. I can not tell you specificly what the vidio card is untill tomorrow untill I look on the box. I dont have anything running in the background that was not running before (anti-virus,firewall,im ect...). Could you explain what a pagefile is and how to set it to auto?


PROCESSOR:
- Socket 478 for Intel Pentium 4 / Celeron Processor
- FSB 800/533/400 MHz
- Support Hyper-Threading Technology
- Prescott support
CHIPSET:
- Northbridge: VIA P4M800
- Southbridge: VIA 8237
HYBRID BOOSTER:
- CPU Frequency Stepless control
- ASRock U-COP
- Boot Failure Guard (B.F.G)
MEMORY:
- 2 x DIMM slot, Max. capacity: 2GB, Support DDR 400/333

VIDEO:
- Intgrated UniChrome Pro 3D Graphics
- Max memory share 64MB (with mini. of 256MB system memory)
SLOTS:
- 1 x AGP 8X/4X slot 1.5V
- 3 x PCI (PCI 2.2 compliance), 1 x AMR slot

AUDIO:
- CMI9761 6 Channel AC'97 audio codec
LAN:
- VIA 6103 10/100 Fast Ethernet LAN PHY
- 802.3u, WOL supported
MODEM:
- AMR Modem (optional)
CONNECTOR/HEADER:
- 2 x SATA 1.5Gb/s connectors supports RAID,0,1,JBOD,
SATA HDD_Hotplug
- 2 x ATA 133/100/66 IDE connectors (supports 4 x IDE devices)
- 1 x FDD connector
- 1 x ATX Power connector (20pin)
- 1 x 12v ATX Power connector (4pin)
- CD/AUX audio in header
- CPU/System Fan connector
- Front panel audio connector
- Power/IDE LED connector
- 1 x Serial Port (COM 1)
I/O: (REAR PANEL)
- 1 x PS2 Keyboard
- 1 x PS2 Mouse
- 1 x VGA Port
- 1 x Printer Port (LPT 1)
- 1 x Audio Port (MIC-IN, LINE-IN, LINE-OUT)
- 6 x USB 2.0 Ports, (2 optional USB 2.0 port via header)
- 1 x RJ 45 LAN Port
BIOS:
- AMI 4MB Flash ROM with ACPI, SM BIOS 3.0, PnP
ACCESSORIES:
- Support CD (Drivers, Utilities, AntiVirus Software, DIY Demo)
- Quick Installation Guide, I/O Shield
- Floppy/ATA 100 cables
- 1 x SATA data cable
- 1 x SATA 1 to 1 power cable
- 1 x COM Port Bracket
DIMENSION:
- Micro ATX (9.6" x 8")
CERTIFICATIONS:
- FCC, CE, MS WHQL