|
-
July 5th, 2005, 02:30 PM
#1
crashing to blue screen
my computer has been resetting it's self about once a month for about a year now after going to a blue screen. The blue screen says something about a serious error and windows must shut down. Problem is it's up for about 2 seconds and then the computer restarts so i can't read it. i have also noticed it says the error is to do with a USB driver or something. when my computer comes back on i tend to get this message(below) from Microsoft although this isn't always the case.
http://oca.microsoft.com/en/response...c8b8f20&SID=10
it tends to restart when playing games or burning DVD's. Once it wouldn't burn a DVD without crashing until i turned hardware acceleration off and then it was fine.
Any ideas people?
Windows 7, Asus P5Q-E iP45 , Core 2 Duo E8400, 4GB Ballistix DDR2 800MHz, GeForce 9600.
-
July 5th, 2005, 03:17 PM
#2
Looking at your specs i can't see why CPU heavy processes would give you a BSOD, i suppose you could try testing the RAM....Memtest
Do you have all the latest Windows Updates?
Liam
Desktop:I5 2500K|Asus P8Z68-V|8GB Corsair Vengeance|1280MB Nvidia 560 TI PE|1TB Seagate/60GB OCZ SSD|LG Blu-ray Writer|Corsair 750W
27" iMac:I5 2500S|12GB Crucial DDR3|ATI 1GB 6970|1TB|Superdrive|Mighty Mouse 
-
July 5th, 2005, 04:11 PM
#3
i have windows update enabled and am up to date. i gave you the link that widows error checking normally gives me but about 30% of the time it tells me to check my memory. Have done this and occasionally it comes up with an error when testing. i will run it again and see if i can give you more info.
Windows 7, Asus P5Q-E iP45 , Core 2 Duo E8400, 4GB Ballistix DDR2 800MHz, GeForce 9600.
-
July 5th, 2005, 05:36 PM
#4
ok just ran mem test and all is not fine . test one came up with 1 error and then test 5 came up with 4921 error!!! sounds like a hell of a lot to me. but i can't seem to find out any more info than that. so where do i go from here?
Windows 7, Asus P5Q-E iP45 , Core 2 Duo E8400, 4GB Ballistix DDR2 800MHz, GeForce 9600.
-
July 5th, 2005, 06:01 PM
#5
Go Here And click "Troubleshooting Memory Errors"
Liam
Desktop:I5 2500K|Asus P8Z68-V|8GB Corsair Vengeance|1280MB Nvidia 560 TI PE|1TB Seagate/60GB OCZ SSD|LG Blu-ray Writer|Corsair 750W
27" iMac:I5 2500S|12GB Crucial DDR3|ATI 1GB 6970|1TB|Superdrive|Mighty Mouse 
-
July 5th, 2005, 06:53 PM
#6
well the only thing i got out of that was i should run the test a module at a time to see if it is one in particular causing the problems which i will do at another time.
also i read this;
"There are some systems that cause Memtest86 to be confused about the size of memory and it will try to test non-existent memory. This will cause a large number of consecutive addresses to be reported as bad and generally there will be many bits in error"
well i had 4921 errors in about 5 seconds all in one test. so that may be the cause of that.
Windows 7, Asus P5Q-E iP45 , Core 2 Duo E8400, 4GB Ballistix DDR2 800MHz, GeForce 9600.
-
July 6th, 2005, 12:17 PM
#7
You can also try Windows Memory Diagnostics, the link is in my sig. Test with one stick in at a time, if any of them report even one error I would get that stick replaced. Just cant trust dodgy ram, it can cause a multitude of hard to troubleshoot problems.
Hong
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|