|
-
August 9th, 2004, 08:38 PM
#1
new hdwe old hd
I am upgrading the motherboard, cpu, and memory from my computer. The old hardware was an ASUS A7S333 mobo, Athlon XP 1600, and 768MB of Kingston PC2100 memory. I am replacing it with an ASUS A7N8X-E Deluxe mobo, Athlon XP 2600 (Barton), and a 1GB of Kingston Hyper-X PC2700 memory. My question is will the current harddrive be able to boot connected to the new hardware and re-configure itself or do i need to re-format the drive? The OS is WinXP Pro.
ASUS P7P55D | Intel Core i5 750 | Corsair 4GB 1600
XFX 5770 1GB | Intel X25-M 80GB | Seagate 7200.12 500GB
-
August 9th, 2004, 10:08 PM
#2
You may end up with BSOD since the chipsets are different.
Advise a clean install.
Additional note, if applicable, WindowsXP Service Pack 2 is available for download.
Cheers.
-
August 9th, 2004, 10:15 PM
#3
I think I am going to feel stupid after I ask this but, what does does BSOD mean? I am pretty sure I know what BS stands for but can you clarify the whole thing for me. Yeah a clean install is not out of the question but I just wanted to see if I could save myself a few hours.
Thanks
ASUS P7P55D | Intel Core i5 750 | Corsair 4GB 1600
XFX 5770 1GB | Intel X25-M 80GB | Seagate 7200.12 500GB
-
August 9th, 2004, 11:22 PM
#4
You should be able to do a repair install of XP. And BSOD means Blue Screen of Death. Something some win98 users know well, me included. 
Intructions are here:
Repair XP
-
August 9th, 2004, 11:22 PM
#5
BSOD = Blue Screen Of Death, what you get when your computer goes on strike.
Depending on your OS you should be able to do a repair instal to maintain your data and settings.
Win98 for example will normally boot and then allow you to update MotherBoard etc drivers.
WinXP may require you to boot with your WinXP CD and do a repair instal to pick up the new drivers.
Dennis
-
August 10th, 2004, 05:59 AM
#6
The issue you'll face is that (as Shinma said) you're going from a Sis chipset based board to an Nvidia one. However, if you pre-load (install) the Nvidia drivers prior to the last shutdown with the old board you can probably get away without having to do either a clean or repair install.
Please remember to post back whether your problem is resolved or
not, so that others may gain from the knowledge.
-
August 10th, 2004, 01:24 PM
#7
So if I preform this "repair install", would that be the same as a fresh install but with having all my old programs installed already?
Thanks!!!
ASUS P7P55D | Intel Core i5 750 | Corsair 4GB 1600
XFX 5770 1GB | Intel X25-M 80GB | Seagate 7200.12 500GB
-
August 10th, 2004, 02:32 PM
#8
Yes all your programs files will be intact after a repair install the only thing you would have to reinstall is all updates/sp1 and hotfixes.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|