|
-
June 14th, 2004, 11:46 PM
#1
Mystery Re-Boot
I recently purchased a Soyo K7VTA Pro Barebones kit and now that I have the system up and running it has been re-booting at will for no apparent reason. I have tried to contact soyo technical support for the last few days and can not get through for help. This has become very annoying. Any ideas
Heard at a local auto-repair shop:
"I couldn't repair your brakes,
so I made your horn louder."
-
June 15th, 2004, 05:58 AM
#2
heat is first thing that comes to mind. There are many things that cause such a condition. Bad reset switch, Bad ram, bad mobo, overheating. YOu will have to run some diagnostics and eliminate things one by one.
I think heat is the number one cause for this type of behaviour.
If it ain't broke, you arn't trying hard enough!!
-
June 15th, 2004, 07:17 AM
#3
And in addition to hardware causes it could also be caused by driver/software type issues. Definately need more info.
Please remember to post back whether your problem is resolved or
not, so that others may gain from the knowledge.
-
June 15th, 2004, 09:13 AM
#4
Control Panel->System->Advanced->Startup & Recovery->Settings->UNCheck Auto Restart
If you're happy and you know it......it's your meds.
-
June 15th, 2004, 05:44 PM
#5
Originally posted by Steve R Jones
Control Panel->System->Advanced->Startup & Recovery->Settings->UNCheck Auto Restart
Does this fix the problem or just stop PC from re-booting. I am using the same settings I had with my old MB... Why does it start re-booting now?
Heard at a local auto-repair shop:
"I couldn't repair your brakes,
so I made your horn louder."
-
June 15th, 2004, 06:11 PM
#6
It won't fix the problem as such, but it will give a Stop error which will indicate where the problem lies. That'll make it much easier to fix the problem.
Nick.
-
June 19th, 2004, 07:09 AM
#7
Originally posted by SuperSparks
It won't fix the problem as such, but it will give a Stop error which will indicate where the problem lies. That'll make it much easier to fix the problem.
I did as advised and it re-booted again same as before without any warning....
Heard at a local auto-repair shop:
"I couldn't repair your brakes,
so I made your horn louder."
-
June 19th, 2004, 10:06 AM
#8
Howdy:
Low system resources is also a big cause of random re-starts..
When this happens, how many programs do you have running once Windows starts and how many do you open and have running at the same time??
Murray
-
June 19th, 2004, 01:50 PM
#9
OK if you don't get the Stop error then it's not a Windows or driver problem. Download this nice little utility, and in the Motherboard>Sensor section you will find the temperatures and voltages, report back what you find.
Everest (nee Aida32)
Nick.
-
June 19th, 2004, 11:33 PM
#10
Sensor Properties:
Sensor Type VIA 686 Internal
Sensor Access ISA 6000h
Motherboard Name Soyo K7VTA Series
Temperatures:
Motherboard 38 °C (100 °F)
CPU 45 °C (113 °F)
Aux 23 °C (73 °F)
ST3120026A 48 °C (118 °F)
Cooling Fans:
CPU 5921 RPM
Voltage Values:
CPU Core 1.65 V
+2.5 V 2.62 V
+3.3 V 3.31 V
+5 V 5.08 V
+12 V 12.29 V
Debug Info 81 A3 B1 8A DC D0 CD CD
Heard at a local auto-repair shop:
"I couldn't repair your brakes,
so I made your horn louder."
-
June 20th, 2004, 01:49 PM
#11
Well it doesn't look like a heat or voltage issue then. Try testing the RAM next. You can run these utilities from a floppy disk:
Memtest86
Windows Memory Diagnostic
Nick.
-
June 26th, 2004, 07:21 AM
#12
I tried everything without any success so I made a last attempt to contact MB manufacture. I was given an okay to replace the MB at there expense. Hopefully this will fix the problem. Thanks all for your support
Heard at a local auto-repair shop:
"I couldn't repair your brakes,
so I made your horn louder."
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|