wireless router/switch recomendations
Results 1 to 9 of 9

Thread: wireless router/switch recomendations

  1. #1
    Join Date
    Mar 1999
    Location
    mpls
    Posts
    408

    wireless router/switch recomendations

    OK, it looks like I'm finally going to delve into the world of wireless networking, mainly due to the fact that I'm too lazy to wire my house (though, I've had such good intentions!)

    I'm talking really simple for now, here's what I want to do:

    I have a PC on the second floor, that's where the cable modem is. I don't have a router yet, since I only have one attached networkable item.

    I have an X-box downstairs which I just got "Live" for. So, I have my second device I want networked.

    I was thinking the minimum amount of equipment to buy would be the following setup:

    A wireless router that happens to have a couple of wired ethernet ports as well, on the 2nd floor.

    A wireless switch on the ground floor that the X-box would plug into.

    Any flaws in my setup? If not, any good recomendations for brand names/model numbers for this setup.

    Thanks y'all.
    ...this one goes to 11...

  2. #2
    Join Date
    Mar 1999
    Location
    mpls
    Posts
    408
    OK, in looking around here are two pieces of equipment that would do just what I need, any yays or nays?:

    Router
    BEFW11S4, wireless router with 4 port switch attached

    Access point
    WAP11 single LAN link on back

    (both are linksys)
    ...this one goes to 11...

  3. #3
    Join Date
    Jun 1999
    Location
    Minneapolis, MN
    Posts
    1,239
    Hi RingoSaturn,

    A big fat YAY from me. Those two devices will do exactly what you need them to do. Go for it!

  4. #4
    Join Date
    Nov 2003
    Location
    45 Degrees North - 10 Degrees East
    Posts
    1,237
    I'll jump in and add a third to the nomination.
    MCSE 2003, Network+, Security+
    Microsoft MVP Windows Server - Networking

  5. #5
    Join Date
    Mar 1999
    Location
    mpls
    Posts
    408
    Thanks for the nods.

    I just ran out to Best Buy (yeah, yeah, I know...) and grabbed the router. They were out of the WAP11s though, so that'll have to wait until I get one online.

    The router was plugged in, up and running within about 10 minutes out of the box. I didn't know it would so frickin' easy!
    ...this one goes to 11...

  6. #6
    Join Date
    Mar 1999
    Location
    mpls
    Posts
    408
    Oh, and Brily, nice to see another Minneapolitan around these parts!
    ...this one goes to 11...

  7. #7
    Join Date
    Nov 2003
    Location
    45 Degrees North - 10 Degrees East
    Posts
    1,237
    Check the deals at www.newegg.com and www.pricewatch.com
    MCSE 2003, Network+, Security+
    Microsoft MVP Windows Server - Networking

  8. #8
    Join Date
    Jun 1999
    Location
    Minneapolis, MN
    Posts
    1,239
    RingoSaturn,

    I'm still trying to dig out my driveway from all the snow!!

    Take care!

  9. #9
    Join Date
    Jul 1999
    Location
    The great state of confusion
    Posts
    483
    I see you had the wireless up and running in about ten minutes... Good job, it really is that easy! What I did not see anyone post or you say was if you are using it with WEP? If not I would do that ASAP... It's not hard and is dumb not to do it... It may not be the best security, but it's better than nothing!


    WEP - Short for Wired Equivalent Privacy.

    http://www.webopedia.com/TERM/W/WEP.html


    The router manual should tell you how to set it up.

    THE MICK
    If you ask for help from the forum, PLEASE take the time to let us know the results so we can all learn.

    THE MICK

    My system specs...
    THE ES - 5,120 (640 8-way nodes) 500 MHz NEC CPUs. 8 GFLOPS per CPU (41 TFLOPS total). 2 GB (4 512 MB FPLRAM modules) per CPU (10 TB total) shared memory inside the node. 640 × 640 crossbar switch between the nodes with 16 GB/s inter-node bandwidth, using 20 kVA power consumption per node

    The machine runs a version of the Super-UX UNIX-based OS. You mean it's not running Windows???

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •