Thanks to all that replyed. I had tried infranview no luck also did get to Sierra www and found the following post
Thanks again to all.

I'm afraid there is only one way to convert PA 3.0 files to PA 15.0 format. First, the files must be converted to PA 4.0 format. Then, they must be converted to PA 8.0 format. The PA 8.0 formatted files can then be opened in PA 15.0. In order to convert PA 3.0 files to PA 4.0 format, you must have PA 4.0 installed on the same computer as PA 3.0. And, in order to convert PA 4.0 files to PA 8.0 format, you must have either PA 8.* or the PA 8.1 Valueline converter installed on the same computer as PA 4.0. Click on the link below to view a discussion regarding the PA 8.1 Valueline converter. PamE "GENERAL: Converting PA 4.x Projects into Print Artist Versions 8 and Up" 5/23/03 9:18pm </[email protected]@.ef24d3f> As you will see in that discussion, there is also another option that you might want to consider.... Open both Print Artist programs at the same time. Use the EDIT | SELECT ALL option to select everything from one page of the v3 project, then select EDIT | COPY. Switch to the open document in the newer version of Print Artist, then select EDIT | PASTE. Repeat this process for each page of the v3.* project.