Mother board beep codes compaq presario 1235 notebook
Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: Mother board beep codes compaq presario 1235 notebook

  1. #1
    Join Date
    May 2001
    Posts
    97

    Mother board beep codes compaq presario 1235 notebook

    Can someone direct me to a site where I van look up mother board beep codes for a Compaq Presario 1235 Notebook?

    And/or does any one know what this beep sequence is for the above mentioned system:

    1 beep followed by 3 short beeps.


    ------------------
    ~Zen
    ~Zen

  2. #2
    Join Date
    Jul 2000
    Location
    N. Virginia--Wash DC area
    Posts
    10,685
    Probably a video problem. Card/onboard chip may be out of kilter. Does the monitor come on?

    [This message has been edited by bistro (edited 10-16-2001).]
    Desktop: Intel i7 960 CPU @ 4.0GHz, EVGA Classified 4-Way SLI mobo, 12GB Corsair Dominator-GT 2000 DDR3 RAM, Crucial RealSSD C300 256GB Solid State Drive, Two WD 2TB SATA drives, 2x EVGA GTX 570 Superclocked graphics cards in SLI, Coolermaster HAF X full tower case, OCZ ZX 1250w PSU, Corsair H100 CPU Cooler
    Laptop: MSI GT60-004US, 2x Seagate Momentus XT 750GB SSD Hybrid drives in RAID 0, 16GB DDR3 1600 RAM, GeForce 670M 3GB graphics card, Networks 'Killer' N-1103 WLAN card

  3. #3
    Join Date
    May 2001
    Posts
    97
    No the montor doesn't come on.


    ------------------
    ~Zen
    ~Zen

  4. #4
    Join Date
    Jul 2000
    Location
    N. Virginia--Wash DC area
    Posts
    10,685
    Vid beep code then. Have you installed anything recently. Try to recall what app/activity was going on just before this or the last shutdown. Were you rebooting?
    Desktop: Intel i7 960 CPU @ 4.0GHz, EVGA Classified 4-Way SLI mobo, 12GB Corsair Dominator-GT 2000 DDR3 RAM, Crucial RealSSD C300 256GB Solid State Drive, Two WD 2TB SATA drives, 2x EVGA GTX 570 Superclocked graphics cards in SLI, Coolermaster HAF X full tower case, OCZ ZX 1250w PSU, Corsair H100 CPU Cooler
    Laptop: MSI GT60-004US, 2x Seagate Momentus XT 750GB SSD Hybrid drives in RAID 0, 16GB DDR3 1600 RAM, GeForce 670M 3GB graphics card, Networks 'Killer' N-1103 WLAN card

  5. #5
    Join Date
    May 2001
    Posts
    97
    Yes I was rebooting. I was in the process of Installing DNS/DHCP manager for novell 5.1.

    ------------------
    ~Zen
    ~Zen

  6. #6
    Join Date
    Jul 2000
    Location
    N. Virginia--Wash DC area
    Posts
    10,685
    That really should not have screwed with your video, but hey, we're talking Windows here...(it's also possible you may have just knocked something loose in there, but doesn't sound likely either--unless you used a baseball bat to reboot it with). I'm going to do some checking around on this one. May take a few. Meanwhile, hang in there.
    Desktop: Intel i7 960 CPU @ 4.0GHz, EVGA Classified 4-Way SLI mobo, 12GB Corsair Dominator-GT 2000 DDR3 RAM, Crucial RealSSD C300 256GB Solid State Drive, Two WD 2TB SATA drives, 2x EVGA GTX 570 Superclocked graphics cards in SLI, Coolermaster HAF X full tower case, OCZ ZX 1250w PSU, Corsair H100 CPU Cooler
    Laptop: MSI GT60-004US, 2x Seagate Momentus XT 750GB SSD Hybrid drives in RAID 0, 16GB DDR3 1600 RAM, GeForce 670M 3GB graphics card, Networks 'Killer' N-1103 WLAN card

  7. #7
    Join Date
    May 2001
    Posts
    97
    Thanks bistro.

    I do remember the vidoe going berzerk befor i had to hard power down. on reboot i got the beeps. I have never worked on a laptop before so i don't know what the vid car/chip looks like or it's location in a laptop.


    ------------------
    ~Zen
    ~Zen

  8. #8
    Join Date
    Oct 2001
    Location
    Dallas,Tx,75231
    Posts
    57
    Can you boot into safe mode?

    ------------------
    Michael
    Michael

  9. #9
    Join Date
    May 2001
    Posts
    97
    I can't see anything because the display is remains black.


    ------------------
    ~Zen
    ~Zen

  10. #10
    Join Date
    Oct 2001
    Location
    Dallas,Tx,75231
    Posts
    57
    1 long, 3 short Conventional/extended memory
    for AMI BIOS if that is what you have

    very possible that it's the video also
    You loaded the Novell 5.1 but what were the sys requirements.

    ------------------
    Michael
    Michael

  11. #11
    Join Date
    May 2001
    Posts
    97
    Should i try pulling out one of my 32mb of ram.

    I wasn't loading novell 5.1. Just a dns/dhcp client that is used to configure the dhcp server on a novell 5.1 server.

    ------------------
    ~Zen
    ~Zen

  12. #12
    Join Date
    Oct 2001
    Location
    Dallas,Tx,75231
    Posts
    57
    not yet.
    Do you see anything when the system is booting?
    even a flash on the screen



    ------------------
    Michael
    Michael

  13. #13
    Join Date
    May 2001
    Posts
    97
    Thanks MichaelH.

    No not a thing on the screen. No flicker or flash.

    ------------------
    ~Zen
    ~Zen

  14. #14
    Join Date
    Oct 2001
    Location
    Dallas,Tx,75231
    Posts
    57
    I'm at a loss, the symptoms say its the video.
    But, at the time of the DNS/DHCP loading?
    too coincedental..



    ------------------
    Michael
    Michael

  15. #15
    Opovet Guest
    Suggest you try an external monitor to see if it is the video or the LCD. will look for the beep codes also.
    edit: http://www.compaq.com/support/techpu.../8361.htmldit:
    if that does not work try :www3.compaq.com/support/

    Opovet

    ------------------
    REAL FRIENDS do not ask friends to fix a Packard Bell or an old Comcraps!!

    [This message has been edited by Opovet (edited 10-16-2001).]

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •