|
-
October 27th, 2000, 02:58 AM
#1
I have installed NT on 13.4 Gb HDU........
I downloaded ATAPI.SYS from Microsoft ftp site to install NT on a partition greather than 4 Gb.
But during installation - after loading the appropriate atapi drive - I can format partition only 4 Gb (fat or ntfs).
Where I fault?
Thanks
-
October 27th, 2000, 10:54 AM
#2
If you are formatting with fat you will still be limited to 4 gigs. However, if you installed the SP4 atapi driver you should be able to access past 8 gigs.
ftp://ftp.microsoft.com/bussys/winnt/winnt-unsup-ed/fixes/nt40/atapi/ATAPI.EXE
------------------
-
October 27th, 2000, 01:22 PM
#3
Just a thought... NTFS partitions are first formatted FAT 16 then converted om first boot to NTFS...
------------------
AMD650 Mhz, K7V, 128Mgb RAM, Matrox Millenium G400 32Mb, SBLive!, 3Com 3C905C
Windows 98 SE + Windows NT 4.0 Workstation
Visit our webiste! -> N-Show 2000
AMD650 Mhz, K7V, 384Mb RAM, Matrox Millenium G400 32Mb, SBLive!, 3Com 3C905C
Windows 98SE + Windows 2000 Pro
-
October 30th, 2000, 03:54 AM
#4
I installed the SP4 atapi driver but I not should be able to access past 4 gigs on NTFS partition.
-
October 30th, 2000, 04:00 AM
#5
I installed the SP4 atapi driver but I not should be able to access past 4 gigs on NTFS partition while formatting hd.
thanks
Originally posted by dek:
If you are formatting with fat you will still be limited to 4 gigs. However, if you installed the SP4 atapi driver you should be able to access past 8 gigs.
ftp://ftp.microsoft.com/bussys/winnt/winnt-unsup-ed/fixes/nt40/atapi/ATAPI.EXE
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|