Will not connect to internet
Results 1 to 14 of 14

Thread: Will not connect to internet

  1. #1
    Join Date
    Sep 2002
    Location
    Australia
    Posts
    743

    Will not connect to internet

    Benq sw32 laptop with vista premium.
    All was working yesterday today, no.
    I cannot get an internet connection with the onboard wireless device,
    i pluged in a network cable still no internet.
    I pluged in a usb network device still no internet.
    All 3 ways of connection i getAccess: Local only
    All other pcs in the network are fine.
    It is showing up in the network.
    In the router under lan it is not listed.
    What is blocking it?
    Gigabyte GA-MA785GMT-UD2H AM3 motherboard
    16 GIG Ram,
    AMD FX 8350, 8 core
    2 x 1gig sata 3 ,,
    1 X 24" wide screen moniter ,
    2 x 17' secondary moniters
    1 x 21" secondary moniter
    Corsair Power
    Corsair Hydro cooler H 60
    1 x blueray burners
    Windows 8.1 x 64 Professional

    Professional DOS dummy.

  2. #2
    Join Date
    Dec 2007
    Location
    Daly City, CA
    Posts
    22,550
    Did you try straight connection to the modem, bypassing router?

  3. #3
    Join Date
    Sep 2002
    Location
    Australia
    Posts
    743
    This moden/router was straight out of the box this morning.
    I managed to get a D-Link tech on the the phone. Half hour later he decided that it was faulty. Even though all other pc's connected ok and this one laptop wouldn't after doing a few dos cmds and a ping his decision was that the router was faulty, it just would not recognise the laptop.
    So i sent it back.
    Wait and see how the replacement goes.
    Gigabyte GA-MA785GMT-UD2H AM3 motherboard
    16 GIG Ram,
    AMD FX 8350, 8 core
    2 x 1gig sata 3 ,,
    1 X 24" wide screen moniter ,
    2 x 17' secondary moniters
    1 x 21" secondary moniter
    Corsair Power
    Corsair Hydro cooler H 60
    1 x blueray burners
    Windows 8.1 x 64 Professional

    Professional DOS dummy.

  4. #4
    Join Date
    Dec 2007
    Location
    Daly City, CA
    Posts
    22,550
    Your post is a perfect example for people, who don't believe in two things:
    1. Bad, out-of-box, devices happen.
    2. It's possible for router to be bad, even if other computers connected to the very same router, can connect.
    Thanks for posting back. Bookmarked for "non-believers"

  5. #5
    Join Date
    Apr 2000
    Location
    Sheboygan, WI
    Posts
    53,391
    One bad port is all it takes. New router time for sure. Bought a couple for that very same reason.

  6. #6
    Join Date
    Sep 2002
    Location
    Australia
    Posts
    743

    Not Good

    New D-LINK dsl 504t router/modem arrived to replace the other new one
    D-LINK said was faulty.
    No luck. Same thing. One laptop will not connect or be recognised by the router.
    I havnt tried D-LINK again.
    But before i do i am going to format and reinstall visat on the laptop in question just as a precaution.
    I turned off the router firewall as well but it made no difference.
    If the format fails that only leaves the router and i cant imagine 2 faulty routers in succession.
    So that leaves something in the router blocking the laptop. But What?
    Will post back after the laptop is formated.
    Gigabyte GA-MA785GMT-UD2H AM3 motherboard
    16 GIG Ram,
    AMD FX 8350, 8 core
    2 x 1gig sata 3 ,,
    1 X 24" wide screen moniter ,
    2 x 17' secondary moniters
    1 x 21" secondary moniter
    Corsair Power
    Corsair Hydro cooler H 60
    1 x blueray burners
    Windows 8.1 x 64 Professional

    Professional DOS dummy.

  7. #7
    Join Date
    Dec 2007
    Location
    Daly City, CA
    Posts
    22,550
    Before you format, I'd call D-Link again.

  8. #8
    Join Date
    Sep 2002
    Location
    Australia
    Posts
    743
    I think i narrowed it down to network names
    On all computers that are connected in the netywork and shareing center
    at the top i have
    this computer---------- Network----------------internet
    On the laptop that doesnt have internet at the top i have
    this computer----------unidentified network----------X---------internet
    The problam is i think in the network names.
    If i go down to unidentified network (private network) then over to customise
    Network name comes up as unidentified network IT wont allow me to change the name to Network. All the other computers allow me to change this name.
    So how can i change it?
    Gigabyte GA-MA785GMT-UD2H AM3 motherboard
    16 GIG Ram,
    AMD FX 8350, 8 core
    2 x 1gig sata 3 ,,
    1 X 24" wide screen moniter ,
    2 x 17' secondary moniters
    1 x 21" secondary moniter
    Corsair Power
    Corsair Hydro cooler H 60
    1 x blueray burners
    Windows 8.1 x 64 Professional

    Professional DOS dummy.

  9. #9
    Join Date
    Apr 2000
    Location
    Sheboygan, WI
    Posts
    53,391
    Does the laptop have the same workgroup name as the other PCs?

  10. #10
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,428
    I assume that the TCP/IP protocol is installed. What does "ipconfig /all" show?

  11. #11
    Join Date
    Sep 2002
    Location
    Australia
    Posts
    743
    I have given up.
    I disconnected everything and put back the old speedstream modem, the
    d-link 8 port router and the dlink 4 port switch.
    Everything works perfectly.
    Except i only have adsl and not adsl 2.
    Gigabyte GA-MA785GMT-UD2H AM3 motherboard
    16 GIG Ram,
    AMD FX 8350, 8 core
    2 x 1gig sata 3 ,,
    1 X 24" wide screen moniter ,
    2 x 17' secondary moniters
    1 x 21" secondary moniter
    Corsair Power
    Corsair Hydro cooler H 60
    1 x blueray burners
    Windows 8.1 x 64 Professional

    Professional DOS dummy.

  12. #12
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,428
    You might check the link below for other possible modem/router combos to try.

    http://forums.whirlpool.net.au/forum...fm/380632.html

  13. #13
    Join Date
    Sep 2002
    Location
    Australia
    Posts
    743

    Finaly

    Finally after all this time i got the laptop to connect.
    I reset the winsock with a dos cmd.

    netsh winsock reset catalog

    Restart the laptop.
    Works perfectly
    Gigabyte GA-MA785GMT-UD2H AM3 motherboard
    16 GIG Ram,
    AMD FX 8350, 8 core
    2 x 1gig sata 3 ,,
    1 X 24" wide screen moniter ,
    2 x 17' secondary moniters
    1 x 21" secondary moniter
    Corsair Power
    Corsair Hydro cooler H 60
    1 x blueray burners
    Windows 8.1 x 64 Professional

    Professional DOS dummy.

  14. #14
    Join Date
    Dec 2007
    Location
    Daly City, CA
    Posts
    22,550
    Aha...I should kick myself in a head

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •