[RESOLVED] How to I.D.cpu core type
Results 1 to 11 of 11

Thread: [RESOLVED] How to I.D.cpu core type

  1. #1
    Join Date
    Dec 2004
    Location
    raised my children in Irving, Tx.,but now I live in the beautiful foothills area of North Central Arkansas
    Posts
    881

    Resolved [RESOLVED] How to I.D.cpu core type

    Yesterday my new case arrived( Coolermaster 532) and I installed the Abit NV8 m/b. Today the cpu,psu,card,ram,hdd. arrived. The cpu is an Athlon 64 3000+ 754 socket...with Venice core. Yep..a Venice core on a 754 socket! I ordered that cpu specifically for the Venice core. My question...I would like to confirm that the processor that Newegg sent me is the Venice core. The box gives no info on that...how do you read the code that is on the processor to tell what type of core that it is? These are the three lines of code: 1.ADA3000AIK4BX. 2. CBBWE O544DAF. 3.XO36357K51402. I am gonna wait until tomorrow morning to install everything...
    Foxconn A7DA-S AM2/AM2+
    G-Skill 2x2Gig DDR2-1066 ( PC2 8500)
    AM3 X2 250 Regor 3.0 ghz ( @ 3500 )
    Enermax 620w psu
    LG sata dvd/cd drive
    WD 80Gig sata..XP Pro
    WD 160 ide..Linux Ubuntu
    CoolerMaster Centurion 534


  2. #2
    Join Date
    May 2005
    Location
    Manchester, England
    Posts
    887
    you can try this. should give you all the information you need. it's a download called Everest;
    http://www.utilidades-utiles.com/Dow...s-Everest.html
    Windows 7, Asus P5Q-E iP45 , Core 2 Duo E8400, 4GB Ballistix DDR2 800MHz, GeForce 9600.

  3. #3
    Join Date
    Dec 2004
    Location
    raised my children in Irving, Tx.,but now I live in the beautiful foothills area of North Central Arkansas
    Posts
    881
    Hey, Judge...well, my final "cost creep" was about $200.00 over what I thought I might initially spend...I guess I got away lucky !! I haven't installed the cpu yet...I might do some tonite after I unwind from a long week...but I was hoping that I could verify that I actually received the correct processor...because if by accident ( several of the reviewers at Newegg stated that they had been sent the wrong item), then I will have to decide if I want to send the cpu back and wait for the correct one or just keep what they sent me. Which leads to this question: What are the differences between these core types: Clawhammer..Newcastle...Venice..?? From what I have read, the Venice seems to be the favorite for various reasons. Oh..btw..I have Everest...I like it...lots of good info. about your sysyem.
    Foxconn A7DA-S AM2/AM2+
    G-Skill 2x2Gig DDR2-1066 ( PC2 8500)
    AM3 X2 250 Regor 3.0 ghz ( @ 3500 )
    Enermax 620w psu
    LG sata dvd/cd drive
    WD 80Gig sata..XP Pro
    WD 160 ide..Linux Ubuntu
    CoolerMaster Centurion 534


  4. #4
    Join Date
    May 2005
    Location
    Manchester, England
    Posts
    887
    well unfortunately i have never owned an AMD based computer. as such i know little about them and will have to leave it to someone else to answer the differences in core types. if it's anything like Intel ones then the names indicate the age. for instance a Northwood is older than a Prescott, but with Intel these CPU's also have different cache’s etc. i would assume the newer core type would be best but i don't know the relative ages of them.
    and I’m not sure how easy it will be to identify the CPU of it's code. you may have to assemble the computer to find out, but i hope that’s not the case to save you time and effort.
    also good to see your "cost creep" was not to high, and I’m sure the extra $200 will be worth it in the long run.
    Windows 7, Asus P5Q-E iP45 , Core 2 Duo E8400, 4GB Ballistix DDR2 800MHz, GeForce 9600.

  5. #5
    Join Date
    Apr 2000
    Location
    Friern Barnet, London, England
    Posts
    46,565
    Another good one for CPUs is:

    CPUID
    Nick.

  6. #6
    Join Date
    Dec 2004
    Location
    raised my children in Irving, Tx.,but now I live in the beautiful foothills area of North Central Arkansas
    Posts
    881
    Eureka...I went back to the AMD site and went to their forum and found lots of discussion about the different cores...a lot of o/c'ing stuff...and found my exact question...and the answer...which is ..yes, I do indeed have the Venice core. A poster gave me the following link that gives a lot of specs about Athlon processors: http://en.wikipedia.org/wiki/List_of...icroprocessors . I didn't know that Wikipedia had that kind of info.!!
    Foxconn A7DA-S AM2/AM2+
    G-Skill 2x2Gig DDR2-1066 ( PC2 8500)
    AM3 X2 250 Regor 3.0 ghz ( @ 3500 )
    Enermax 620w psu
    LG sata dvd/cd drive
    WD 80Gig sata..XP Pro
    WD 160 ide..Linux Ubuntu
    CoolerMaster Centurion 534


  7. #7
    Join Date
    Jun 2005
    Location
    Ft Myers FL
    Posts
    8,520
    Here's the only Google result to confirm the Venice nickname. The specs all match and it's the same product number. Hope this helps.

    EDIT--You're more patient than I am, wading through the AMD forums! Take Wikipedia with a grain of salt. I'm never sure how thoroughly the contributors research their posts.
    Last edited by lgbpop; February 24th, 2006 at 11:03 PM.

  8. #8
    Join Date
    Dec 2004
    Location
    raised my children in Irving, Tx.,but now I live in the beautiful foothills area of North Central Arkansas
    Posts
    881
    lgbpop...what language is that...Russian? The AMD forum is definitely different from this one....that's okay, because it helps me realize and appreciate this place that much more!!!
    Foxconn A7DA-S AM2/AM2+
    G-Skill 2x2Gig DDR2-1066 ( PC2 8500)
    AM3 X2 250 Regor 3.0 ghz ( @ 3500 )
    Enermax 620w psu
    LG sata dvd/cd drive
    WD 80Gig sata..XP Pro
    WD 160 ide..Linux Ubuntu
    CoolerMaster Centurion 534


  9. #9
    Join Date
    Jun 2005
    Location
    Ft Myers FL
    Posts
    8,520
    It's Russian. It's actually easy to figure out most of it once you learn the Cyrillic alphabet--most of their technical terms are borrowed from English.

  10. #10
    Join Date
    Dec 2004
    Location
    raised my children in Irving, Tx.,but now I live in the beautiful foothills area of North Central Arkansas
    Posts
    881
    lgbpop...I have heard that English is one of the hardest languages to learn...coming from so many different root languages...so much slang...I personally like to hear the French language...slides smoothly ...It is kinda funny to hear a foreign ( before too long, we will have to re-define what 'foreign' means!!), language being spoken and then hear English words mixed in.
    Foxconn A7DA-S AM2/AM2+
    G-Skill 2x2Gig DDR2-1066 ( PC2 8500)
    AM3 X2 250 Regor 3.0 ghz ( @ 3500 )
    Enermax 620w psu
    LG sata dvd/cd drive
    WD 80Gig sata..XP Pro
    WD 160 ide..Linux Ubuntu
    CoolerMaster Centurion 534


  11. #11
    Join Date
    Jun 2005
    Location
    Ft Myers FL
    Posts
    8,520
    It is kinda funny to hear a foreign language being spoken and then hear English words mixed in.
    Man, does that bring back a vivid memory...back in the '60's on Sunday mornings my Dad would have the radio on while we had breakfast and got ready for church. He loved polka music, and always listened to WACE-AM (730, I still remember) out of Chicopee Mass., to a guy named Andy Szczebrilla (not sure of the spelling ) who spoke rapid-fire Polish. When he'd do a commercial for a local business, hearing the name in English was almost jarring. It always made us all laugh.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •