|
-
November 18th, 2004, 06:01 PM
#1
What's it for?
Long story short:
Gainward Pro/660 TV/DVI 128mb video card, fx5200 chipset.
This cheepo has a tiny two prong connector on it, similar to a cpu fan connector. What's it do?
The card has a large heat sink attached but no fan. The manual shows nothing on it nor does gainward's site, and there is no corresponding cable in the box. The PS itself has no such connector either. The only cards I've seen that require power directly from the PS use a standard 4 pin molex.
Anyone enlighten me?
Last edited by Triple7's; November 18th, 2004 at 06:11 PM.
-
November 18th, 2004, 06:19 PM
#2
Sounds like an "optional" fan connection to me!
If you're happy and you know it......it's your meds.
-
November 18th, 2004, 06:21 PM
#3
Yup, definately for a fan.
Please remember to post back whether your problem is resolved or
not, so that others may gain from the knowledge.
-
November 18th, 2004, 06:47 PM
#4
They may use the board on different models and just change the chipsets so it could be a jumper or a fan connection.What voltage does it give across the pins?
EDIT look ing at the picture of the card it certainly has the fan connector base surround on the pins.
Last edited by 104456; November 18th, 2004 at 06:50 PM.
-
November 18th, 2004, 09:07 PM
#5
Yup...what Doc said....
That is for those of us who would remove that god awful looking heatsink and put on an aftermarket heatsink and fan such as the blue orb or crystal orb by thermaltake....
I have been impressed with the urgency of doing. Knowing is not enough; we must apply. Being willing is not enough; we must do.Leonardo da Vinci
Tesla's Fansite
-
November 19th, 2004, 11:01 AM
#6
Thanks for the responses guys.
The thought of it being a jumper had crossed my mind but I sort of dismissed it as it certainly appears to be a power connection.
That is for those of us who would remove that god awful looking heatsink and put on an aftermarket heatsink and fan such as the blue orb or crystal orb by thermaltake....
There aint no way you'ld ever be able to remove the heatsink without destroying the card. It's permanently attached.
I now know the higher end model of this card (256mb ver.) does come with a fan. So, as 104456 pointed out, I'll "assume" it's there for universal fitments across different model #'s.
Thanks again. 
Oh, BTW 104456. I couldn't tell you what voltages are there as the machine it's in is three states away. It belongs to one of my sisters friends. I'm looking at basicly the same photo you are, hence, "long story short". 
I did run out last night after this post and checked the exact same card off the shelf at Frye's though. I convinced a salesman to open the box. He happily did so.
Last edited by Triple7's; November 19th, 2004 at 11:36 AM.
-
November 19th, 2004, 11:52 AM
#7
Should have asked him to plug a fan in too
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|