|
-
May 2nd, 2002, 10:16 AM
#1
can't find 2nd hard drive
I am trying to install a second HD on a friends computer which is running win95 on I believe a Phoenix 586 PCI pNp motherboard.
It sees the harddrive in the cmos and while booting up but when you clinck on my computer on the desktop or go to explorrer there is only the c drive. It is a seagate drive but I wen to their website and set it as the slave. is there anything else i can do to get it to show on the desktop.
thanks
coops
"I think, therefore I get in trouble!"
-
May 2nd, 2002, 11:54 AM
#2
When you set it as slave, you mean you physically changed the jumper to slave, and not just that you put it on the same ribbon cable with the MASTER, right?
If so, try the drive on the SECONDARY side of the motherboard using both MASTER and SLAVE, just to see if either of these work.
Post back the results-and we'll go from there.
-
May 2nd, 2002, 11:58 AM
#3
Is this a new or used drive and, if new, did you use fdisk to create a partition on the drive then format it?
-
May 2nd, 2002, 04:09 PM
#4
you got it cliff, forgot to create a partition on disc after I erased it.
now for some reason the computer just shuts itself down..power supply may be going.....
thansk for your help
"I think, therefore I get in trouble!"
-
May 3rd, 2002, 12:14 AM
#5
MP 
When does the power-down problem happen?
-
May 3rd, 2002, 05:34 PM
#6
whenever it wants to as far as I can tell. I was doing something and after 5 minutes of working it just stopped. last night it ran all night and into today when I shut it down.
anyways all that was needed was done and now it is back with its owner - for now.
"I think, therefore I get in trouble!"
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|