|
-
April 3rd, 2012, 03:03 PM
#1
Bios not retaining settings
Hi Folks,
Sorry I don't have the full specs for the PC in question (I don't have it in my possesion to find out, although I have had it before), I hope you may be able to offer some ideas though.
Basically it's an old Packard Bell running a P4 or maybe a P4D, it has 2 gig PC3200 ram occupying the 2 ram slots available, an 80 Gb IDE Drive and a dedicated Graphics card on AGP (I think).
Basically, the PC started to forget some if not all of it's Bios settings. This info I've gleaned from the PC owner as she has to re-set the time and date every time she starts up the PC (she does this via XP Clock after it's booted).
I changed the cmos battery for a brand new one, and this I thought had solved the problem. However, a month later the symptoms have re-appeared.
I will be replacing the battery again (could have been a dodgy one?), but I'd like to get some pertinent info should there be another issue.
The owner has stated that she thinks the problem started after she upgraded her monitor to and LED one, could this be an issue?
When not using the PC it is shutdown and powered off at the wall, given the PC is used daily for approx 2 or 3 hours, could this be an issue?
Is it possible that some hardware is draining the battery at a rate that is not normal?
Anything else I should be considering?
Many thanks in advance
Phil
-
April 3rd, 2012, 04:06 PM
#2
It will quite possibly turn out to be a bad battery. When you replace it, give the contacts in the battery holder a good rub, in case there is a bit of corrosion in there.
Hopefully that's all it is, but if it keeps draining the battery very quickly, it is usually a sign that a motherboard component has failed, and there really isn't a lot you can do about it other than constantly replace batteries. It wouldn't be worth replacing the mobo in a PC that old.
Nick.
-
April 3rd, 2012, 04:17 PM
#3
Thanks for the prompt response.
Lets hope it is just the battery
Thanks again
phil
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|