New PC Build
Results 1 to 9 of 9

Thread: New PC Build

  1. #1
    Join Date
    Dec 2000
    Location
    Farmington Hills, MI. USA
    Posts
    22

    New PC Build

    The last machine I built was back in Feb 2016 and it is still rock solid and I use it to date.

    I am building a new PC now and I have some questions and need some suggestions. My work involves programming and development. I do all of my development work on my Virtual Machines and try not to install too much software on the primary OS on the host machine. Some of the work I do involves some graphic design and I needs Photoshop and Illustrator installed on the primary desktop. To be able to run VMs I need a lot of memory. My current build has 32 GB RAM.

    So enough with the background....

    Here are the parts that I have come up with for the new build:




    About the video card, I don't want to break the bank since I don't play any graphic intensive games. I am not into gaming whatsoever. The CPU I have selected does have integrated graphics but since I want to continue to have dual display, I do want a dedicated GPU. My current GPU on my 8 year old build is this:

    EVGA Superclocked GeForce GT 740 2 GB Video Card

    Can I continue using this in the new build? If not, I was thinking of getting this since its not too expensive.

    XFX GTS XXX Radeon RX 580 8 GB Video Card


    My question is, would it be a worth-it upgrade? I will consider other suggestions and I really appreciate it if you have read my lengthy post up until this point.

    About the Power Supply, I have Thermaltake 700W smart series in my current build. I am also debating whether to replace it or not. Besides not being modular and poor cable management, no complaints.

    Currently I have the following case and I need suggestions for a basic case with good airflow, cable management to compliment a good PS and has at least four 3.5" drive bays and 2 SSDs.

    Corsair Carbide Series SPEC-02 Mid-Tower Gaming Case


    Again, I REALLY apprecaite all the help.

    Thanks,
    Last edited by masif2001; November 7th, 2024 at 02:49 AM.

  2. #2
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,181
    The Radeon video card would be a worthwhile upgrade, assuming that you have better luck with Radeon cards than I have. ALL of the Radeon cards that I have used have eventually failed, usually taking out the motherboard as well.

    A better option might be this, although it is a little more expensive:

    https://www.bhphotovideo.com/c/produ..._rtx_3050.html

    The power supply should be OK, although a fully modular PSU might make it easier to route the cables.

    https://www.newegg.com/corsair-sf-se...82E16817139330

    https://www.newegg.com/corsair-rm850...82E16817139306

    A good case can be hard to find these days. Case makers assume that you don't need any drive bays these days.

    Do you need to add any externally accessible (CD/DVD, etc.) drive bays?

    https://www.newegg.com/black-phantek...82E16811854003

  3. #3
    Join Date
    Dec 2000
    Location
    Farmington Hills, MI. USA
    Posts
    22
    I updated some of my parts based on the feedback I received. I would really appreciate a cursory look from the exports. Thanks!

    https://pcpartpicker.com/list/L88P6Q

    I will stick with onboard graphics or GT 740 for now but may upgrade it in a few months

  4. #4
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,181
    The processor is an Intel 12th Generation, so it is not affected by the heat degradation issue that the 13th and 14th generation CPUs have.

    https://www.zdnet.com/article/intel-...-need-to-know/

    The case looks good as long as you do not need any external drive bays.

    The other components look good. You may want to read the reviews for the motherboard, as they may have some useful information.

    https://www.newegg.com/msi-mag-z790-...PUTIqclj5cTCMo

    https://www.amazon.com/MSI-MAG-Z790-.../dp/B0BL8K1YH1

  5. #5
    Join Date
    Dec 2000
    Location
    Farmington Hills, MI. USA
    Posts
    22
    Can you shed some more light on your reference to external drive bays in relation to getting a computer case? I thought those are usually USB based. What does a Case need to be able to support external drive bays? thanks!

  6. #6
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,181
    These days, case manufacturers assume that you are using 1 M.2 SSD for storage, and, since that mounts onto the motherboard, you do not need any internal or external 2.5 inch or 3.5 inch or 5 inch drive bays in your case.

    However, if you actually want a second drive to store data that is not an expensive M.2 SSD, you may be using magnetic storage drives like these:

    https://www.newegg.com/seagate-exos-...82E16822185011

    https://www.newegg.com/seagate-momen...82E16822148903


    If you want to play music CDs or movie DVDs or BluRays, you may want one of these:

    https://www.newegg.com/lg-model-gh24...82E16827136276

    Other accessories that you may have:

    https://www.newegg.com/xigmatek-75-i...82E16820815001

  7. #7
    Join Date
    Dec 2000
    Location
    Farmington Hills, MI. USA
    Posts
    22
    The case that I am planning to buy as listed in my pcpartpicker list supports up to 10 drives because of the number of bays it has. I could still add 10 more using the external drive bay so I am still a bit confused about your comment.

  8. #8
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,181
    Your specified case has plenty of internal drive bays for 2.5 inch or 3.5 inch hard drives. However, it has no external drive bays, so if you wanted to add a CD/DVD drive where you need to insert a disc, or a memory card drive or a removable hard drive bay where you can insert a hard drive that would normally be mounted internally (for use with off-site backup, for example), it does not have that capability. If you never need any of these devices, then there is no problem.

  9. #9
    Join Date
    Dec 2000
    Location
    Farmington Hills, MI. USA
    Posts
    22
    Quote Originally Posted by jdc2000 View Post
    Your specified case has plenty of internal drive bays for 2.5 inch or 3.5 inch hard drives. However, it has no external drive bays, so if you wanted to add a CD/DVD drive where you need to insert a disc, or a memory card drive or a removable hard drive bay where you can insert a hard drive that would normally be mounted internally (for use with off-site backup, for example), it does not have that capability. If you never need any of these devices, then there is no problem.
    Okay I understand now. The "external" here really means externally accessible plug'n play drive bay. Thanks!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •