Panasonic Toughbook CF-27 MSDOS help please
Results 1 to 4 of 4

Thread: Panasonic Toughbook CF-27 MSDOS help please

  1. #1
    Join Date
    Apr 2024
    Posts
    2

    Panasonic Toughbook CF-27 MSDOS help please

    Good (morning, afternoon, evening)(pick one)

    I have an unusual situation and need some help....

    I have a Panasonic Toughbook CF-27 (mark 1 if it's important)
    that I am using to program some old two-way radios...
    It's running MS-DOS 6.22 with no add-ons or mods.

    The CF-27 has a slot that supports either a floppy or a optical drive.
    I have a DVDRW drive in the slot (a CF-VDM293 that consists of a
    UJ-841 laptop drive and a CF-27 slot adapter. I have the specialty
    cable that connects the floppy to the back of the laptop to allow
    both to be used.

    The problem is that I cannot locate the Panasonic-written driver that
    allows the Panasonic UJ-841 optical drive to be accessed by MSCDEX
    (the driver is called by CONFIG.SYS with a DEVICE= statement and
    MSCDEX is run from AUTOEXEC.BAT).

    If I use the W98 Emergency Boot Disk the optical drive works just fine...
    but that's not MSDOS 6.22 (and there is no device driver call in the
    CONFIG.SYS)

    Why am I going to this effort?
    I am taking care of many old 2-way radios that are still in service...
    including Motorola Syntors, Maxtracs, Radius and GM300s.

    The radio programming software for all of them require a hardware
    serial port chip (COM1 and COM2) and they take advantage of the
    MS-DOS quirks that allow the applications program to talking directly
    to the serial port chip.

    And some of the old radio programs have timing loops and they
    need an old slow (200-300 MHz) computer to run correctly.

    The CF-27 Toughbook handles both of those conditions and does
    so VERY well. Plus it was free, and it's rugged enough to toss in
    the 4x4 for trips to the 7 mountaintop tower sites that we are
    responsible for... I have this CF-27 for MS-DOS and Win98, a
    CF-30 for the 32-bit programs that can run under Win7 and a
    CF-31 for the newest programs that require 64-bit Windows.

    Thanks for any help in advance

    AnotherMike

  2. #2
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,181
    It might be helpful if you posted the name of the driver file from the DEVICE= line.

    Also, what part of the radio maintenance are you needing the CD-ROM drive for? There may be an alternative.

  3. #3
    Join Date
    Apr 2024
    Posts
    2
    Thanks for the response.

    Quote Originally Posted by jdc2000 View Post
    It might be helpful if you posted the name of the driver file from the DEVICE= line.
    I wish I knew. I'd go looking.
    All I have is the CF-27 and is has a drive bay that can have either a
    floppy or a optical drive slid into it.
    The optical drive is either the UJ-841 or a CD-VDM293U, and it supposedly
    came with a floppy disk with the driver file and a sample CONFIG.SYS and
    AUTOEXEC.BAT on it.

    I was hoping that someone knew the name of the Panasonc-written driver.
    Then I could go looking with google or at one of the archive sites.

    Quote Originally Posted by jdc2000 View Post
    Also, what part of the radio maintenance are you needing the CD-ROM drive for? There may be an alternative.
    A friend's two=way shop has a number of the Motorola radio programs on their distribution CDs.
    The most important radio is the M10, M120, M130, GM300 series and i happen to have that
    program on a floppy. Getting the CD-ROM drive running is so I can get the other programs
    onto the CF-27.

    Mike

  4. #4
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,181
    If you are just wanting to transfer some files or programs to the CF-27, can you just boot using the Windows 98 boot disk and then use the CD-ROM drive to copy the files to a folder or folders on the hard drive?

    Another alternative would be to transfer the files to a floppy disc or your floppy drive is working with the CF-27.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •