-
March 25th, 2021, 09:09 AM
#1
REDUNDANCY CHECK PROBLEM?
I have this laptop hard drive that I am trying to format. Under disk manager, it shows as unknown and not initialized . So when I try to initialize it, I get this message: Data Error (cyclic Redundancy Check) I've tried a number of ways according to website articles, but nothing works. Is there any way to do this that I might not be aware of.
I have also used DiskPart under CMD & it will show the disk but thats all. Yet when I click Properties under disk management, it says : this device is working properly..
Being Unallocated with no volume, its dead ?
Where there's a will, there's a way
-
March 25th, 2021, 12:00 PM
#2
Have you tried all of the methods in this article?
https://www.easeus.com/resource/fix-...ncy-check.html
If yes, and nothing has worked, you could try removing the driver from the laptop and connecting it to a different system to see if you can format and initialize it. If that does not work, the drive may be bad.
-
March 25th, 2021, 02:02 PM
#3
Thanks jdc, BTW, the drive is in a docking station, not in the laptop. Seems like most fix-it formulas require either a volume indicator or a hd letter like C,D, E F, etc of which I am unable to establish. But I'll keep trying.. Thanks for the info..............
Where there's a will, there's a way
-
March 25th, 2021, 02:13 PM
#4
the drive is in a docking station
That is relevant information. You may have more success if you connect the drive directly to the laptop or to a desktop computer. That would eliminate the docking station and/or USB interface as a source of trouble.
Does the drive have any data on it that you are wanting to recover? If not, then you could install it in the laptop and boot from the laptop's CD/DVD drive (assuming that it has one) or an external CD/DVD drive or USB drive, to format the hard drive.
-
March 25th, 2021, 03:42 PM
#5
I'll surely give that a try. Thanks for the info............
Where there's a will, there's a way
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|