Printable View
Have sony laptop and at first boot says
SMART failure predicted on hard disk
backup and replace hard disk.
failure may be imminent
Then when get into windows 7 another warning comes up and says
Windows detected hard disk failure
The system seems to be running ok ,a little sluggish. I am told this laptop is a little over a year old. I ran rkill and combo fix and also malware to see if something bad was causing this but still getting error.
The warnings say it all. Immediately back up everything you don't want to lose and replace that hard drive.
I agree, the hard drive is failing and needs to be replaced.
If you'd like another opinion, run the appropriate manufacturer's Hard Disk Diagnostic utility. Most can be found on the UBCD: http://www.ultimatebootcd.com/
--
Note that generally speaking, laptop hard drives sustain more abuse than those mounted in a desktop.
--
http://www.newegg.com/Store/SubCateg...es&Order=PRICE
I would backup important data before doing anything;)
Absolutely--that's what I suggested in Post #2.
Yes I saw that you posted that;) Would you too backup before testing the drive like I would:confused:
ran a program that uses smart and here is the report,all test said ok
-------------------------------------------------------
DRIVE HEALTH (http://www.drivehealth.com)
-------------------------------------------------------
Core Service : version 2.5.194 (built on 9/22/2009)
Report Tool : version 2.1.57 (built on 9/22/2009)
WindowsVersion : Windows 7 6.1 (Build 7600)
-------------------------------------------------------
ReportDate : 2/5/2012 9:00:26 AM
DrivesSupportsSmart : 1
-------------------------------------------------------
DRIVE #0
-------------------------------------------------------
Main Parameters
-------------------------------------------------------
Capacity : 640.14 GB
GetConfig : 0040h
NumCyls : 16383
NumHeads : 16
BytesPerTrack : 0
BytesPerSector : 0
SectorsPerTrack : 63
VendorUnique : 000000000000h
SerialNumber : Y0MCD0AGB
BufferType : 0000h
BufferSize : 16384
ECCSize : 0
FirmwareRev : GH012H
ModelNumber : TOSHIBA MK6465GSXN
MoreVendorUnique : 8010h
DoubleWordIO : 0000h
Capabilities : 2F00h
PIOTiming : 0200h
DMATiming : 0000h
BS : 0007h
NumCurrentCyls : 16383
NumCurrentHeads : 16
NumCurrentSectorsPerTrack : 63
CurrentSectorCapacity : 16514064
MultSectorStuff : 0110h
TotalAddressableSectors : 268435455
SingleWordDMA : 0007h
MultiWordDMA : 0007h
-------------------------------------------------------
S.M.A.R.T. Capabilities
-------------------------------------------------------
SmartVersion : 1.1
SmartIDEDeviceMap : 00h
SmartCapabilities : 07h
SmartCapAtaIdSupported : Yes
SmartCapAtapiIdSupported : Yes
SmartCapSmartCommandsSupported: Yes
-------------------------------------------------------
S.M.A.R.T. Attributes Status
-------------------------------------------------------
ID VL WS TS MN MX LfRt RAW-DATA T.E.C. FLAGS
01 64 64 32 00 00 1.00 000000000000 FW LC -- ER -- --
02 64 64 32 00 00 1.00 000000000000 FW -- PF -- -- --
03 64 64 01 00 00 1.00 000000000755 FW LC PF -- -- SP
04 64 64 00 00 00 1.00 0000000003FE -- LC -- -- EC SP
05 01 01 32 00 00 1.00 0000000007FF FW LC -- -- EC SP
07 64 64 32 00 00 1.00 000000000000 FW LC -- ER -- --
08 64 64 32 00 00 1.00 000000000000 FW -- PF -- -- --
09 63 63 00 00 00 1.00 0000000002BF -- LC -- -- EC SP
0A 78 64 1E 00 00 1.00 000000000000 FW LC -- -- EC SP
0C 64 64 00 00 00 1.00 0000000003B8 -- LC -- -- EC SP
BF 64 64 00 00 00 1.00 000000000031 -- LC -- -- EC SP
C0 64 64 00 00 00 1.00 000000000018 -- LC -- -- EC SP
C1 63 63 00 00 00 1.00 00000000371B -- LC -- -- EC SP
C2 64 64 00 00 00 1.00 002D00090025 -- LC -- -- -- SP
C4 64 64 00 00 00 1.00 0000000002CA -- LC -- -- EC SP
C5 64 64 00 00 00 1.00 000000000000 -- LC -- -- EC SP
C6 64 64 00 00 00 1.00 000000000000 -- -- -- -- EC SP
C7 C8 C8 00 00 00 1.00 000000000000 -- LC -- -- EC SP
DC 64 64 00 00 00 1.00 00000000203C -- LC -- -- -- --
DE 63 63 00 00 00 1.00 000000000256 -- LC -- -- EC SP
DF 64 64 00 00 00 1.00 000000000000 -- LC -- -- EC SP
E0 64 64 00 00 00 1.00 000000000000 -- LC -- -- -- SP
E2 64 64 00 00 00 1.00 000000000115 -- LC PF -- -- SP
F0 64 64 01 00 00 1.00 000000000000 FW -- -- -- -- --
-------------------------------------------------------
for some reason I keep getting burning error when trying to burn the iso for Ultimate boot cd
You may find these instructions helpful for burning the UBCD .iso file to disc:
How can I write (burn) ISO files to CD or DVD?
ran a benchmark tool in ubcd and said there is probibly an active virus in memory
Steve R Jones--Yup, that's why I used the word "immediately". :D
ok backed everything up and did a system restore boot diskm now it sees the system restore file and then when to try to restore getting a fail msg,,got new hd in the machine and just want to restore the image but not working
I boot off the recovery disk I made from windows 7 and then go to system image and then it pukes.. it sees it ,the last disk but then what it says it failed
Just to be clear, you are talking about a system image made from Control Panel>Backup & Restore here aren't you?
Is there any error message or code shown when the restore fails?
Yes did the system image and recue boot disk out of windows. There was a code but cannot access it att. I think my prob was that there was no o/s on the new hard drive . I assumed that the image disk would do that for me. So I am installing windows 7 back on and see if that works. Now when restoring I put the last disk in first for the system to see it right? Then do I put in disk 1 after that?
how bout 0x80042412 as error code
hdd size limitation is a good possibility..
http://answers.microsoft.com/en-us/w...c-3b081fc560df
ok it sees the image file,at the point where is says choose additional restore options and the format and repartion disk option is not available
When it gets to format and repartition disks the check box there is greyed out and you cant clik on it , here is there error when fails 0x80780003
http://forum.notebookreview.com/wind...g-me-nuts.html?Quote:
... what I learnt was ... if there was more than one backup folder for the pc under the WindowsImageBackup folder, then when I tried to do a Complete PC restore, it would get the error mentioned above ...
So the resolution was quite simple, to remove all the additional backup folders other than the main one for the PC and put them in another directory elsewhere on the drive, or another drive.