Memory not posting

just purchased a Mobo from Intel.. model # is BOXDG965RYCK and OCZ26671024V 1gb memory from OCZ technologies.. but when i have it in the motherboard and boot up.. all the fans/lights turn on but the monitor doesnt and there arent any beeps. Now before we start trying to figure this out i did call intel and they told me that there is a list of tested memory on their website. I went there and check it out but this model was not there.. there were only a few different models that they tested.. now both the motherboard and ram are 1.8V so that isnt it.. and they both have the same timings 5-5-5... so should i just buy ram that is already tested or is there something i can do? thanks in advance for any help

I would clear the CMOS first before trying anything else.

yea.. did that already

Odds are that it isn't the ram...Seems like no video is the #1 problem with new builds.

You'll need to tripple check the power switch cables and make sure the mobo isn't grounded.

not sure what u mean by grounded, but i checked all the connections and everything looks fine.. now on the power switch cables, does it matter what side i put them on.. what is the positive and negative.. they each have a color and a white.. are the whites the positive?

Make sure the mobo is not touching the case, and is screwed down properly, if need be you could remove it and place it on a piece of cardboard and try and boot in the same way.

Double-check the graphics card, as it performs its own POST before anything else, Steve is correct that it is the most obvious here.


Liam

Quote:

---

Originally Posted by bluenautica

now on the power switch cables, does it matter what side i put them on.. what is the positive and negative.. they each have a color and a white.. are the whites the positive?

---

It doesn't matter which way round you connect the power, reset or speaker connectors. Only the LED's are polarity sensitive.

okay, im at the office right now.. but i will do what you said, take out the mother board and lay it on some cardboard.. ill keep my fingers crossed.. funny you say that everything is pointing to the motherboard being grounded.. intel told me everything is pointing to the memory.. lets see what happens

oh by the way.. the video card is onboard, right now i dont have my purchased video card attatched, which is an ati all in wonder x1900

OCZ is top-quality RAM, but looking at the specs it's 667MHz while the mobo is 800/1066MHz. There might be a problem with the RAM being too slow for the mobo.

FWIW, OCZ RAM is already tested. I've read that they buy only the best 1% or so of the RAM their suppliers manufacture, then test it again before they put their name on it. Some time back, their PC2100 RAM was so good and would overclock so far it was marketed and sold by retailers as PC2400. I have a gig of that in a computer here and it's first-rate stuff.

nah.. it can take the 667MHz, 800/1066MHz is where it tops out.. i spoke with a intel tech support rep today and he said that everything i described sounds like a memory issue.. i will look into seeing if the mobo is grounded like steve suggested as soon as i get home 1am eastern time.. but if anybody has any other solutions to throw at me, please keep them coming

where did you see that OCZ is tested for my mobo?

i forgot to mention one minor detail.. dont know if this matters.. i tried booting up without the memory and i got the 3 beeps.. does that mean anything

also here is the link to the intel page
http://www.intel.com/products/mother...65ry/index.htm

Quote:

---

where did you see that OCZ is tested for my mobo?

---

Where'd you get that from? I said:

Quote:

---

FWIW, OCZ RAM is already tested.

---

It's not tested for any specific board; it's tested before it's sold. Period. Just as Lincoln test-drives every car they sell before they're shipped to the dealers. They're not test-driven for any specific dealer or owner.

sorry for the confusion but intel has a list of known RAM that they tested for this specific board (aka DG965RY)

http://developer.intel.com/design/mo...nternalmem.htm

okay.. so im home now.. i put the motherboard on a large piece of cardboard, made sure nothing metallic was touching it.. reset the batter for the cmos, and then connected the Memory, hdd, power and thats it.. still same results.. no beep, no video, i purchased crucial RAM (was on Intels tested memory list) and it should be here in a few days.. i guess then i will know if it was the memory or the Mobo.. wish me luck.. any other suggestion are kindly appreciated

Quote:

---

Originally Posted by bluenautica

i forgot to mention one minor detail.. dont know if this matters.. i tried booting up without the memory and i got the 3 beeps.. does that mean anything

---

In order to do a POST (Power-On Self Test), the motherboard must have a CPU (Central Processing Unit) and RAM (Random Access Memory) installed.

Quote:

---

i forgot to mention one minor detail.. dont know if this matters.. i tried booting up without the memory and i got the 3 beeps.. does that mean anything

---

The only indication is that the case's speaker works...Plus that the memory was plugged in properly(that is, before removing it ;) ).I wouldn't consider this a memory issue myself, have u tried another monitor?Or even a graphics card?

the processor and RAM are both connected.. the monitor works fine because i have it connected to my old system.. and why should i be using a video card if my mobo has onboard video.. well i even tried it with my new ati all in wonder connected and still no video.. oh and gioannou, what would u consider this issue to be?? since you dont think its memory related?

Maybe it's a bum RAM chip?? Just a thought. Maybe buy a DELL instead of taking this any farther? Some of the new "Alienware" systems are nice as well. You could always take your pieces to a shop and let some computer people take a look at it?
Over and out good buddy!

The symptoms that you describe are typicall of a DOA motherboard. It could be the RAM, but the memory wouldn't be high on my list of suspects here.

One thing does spring to mind - have you got the 12volt CPU connector plugged in? If you don't then that will also give these exact symptoms of the fans spinning up but no POST or beeps.

https://discussions.virtualdr.com/

I just lost an older motherboard to the same symptoms. My heart goes out to you! Good luck with the replacement.