EMM 386 Not Installed XMS Mgr. Not presetn

Printable View

November 19th, 2002, 12:04 AM
nanabass

EMM 386 Not Installed XMS Mgr. Not presetn

:( I get a message as follows: EMM 386 Not Installed XMS Manager Not Present Press Any Key to continue.
At the same time this occurred, My Atapi CD-Rom and secondary hard drive disappeared. Internet Explorer and Outlook Express will connect through my ISP but I get This Page Cannot Be displayed and Cannot poll for messages. Would it be best to format my C drive and start from scratch. I've tried uninstalling OE and IE but that gets me no where. Please help, about ready the trash the thing. No viruses are detected and my subscription is up to date.
November 19th, 2002, 03:42 AM
jdc2000

Despite your scans with the latest antivirus defs, I am still suspecting a virus. One of the latest viruses that came out (opasrv) was not detected initially by the current virus definitions. If you are getting the error during boot up, before WIndows loads, I suspect that there is something in your CONFIG.SYS or AUTOEXEC.BAT files that is causing this and possibly your other probems. If you could post the contents of those files, we might be able to determine the culprit.
November 19th, 2002, 11:18 AM
Calpitor

How long have you been getting this error? The more info you give the easier it is to diagnose and resolve. The two files that have become problematic are memory manager files often victims of a virus but this doesn't necessarily mean you have a virus.
What changes have been made, i.e. any new software or hardware added in the last couple of weeks? Here are a few of things you can try before format and reinstall: running scanreg /restore to a date prior to errors; renaming autoexec.bat and config.sys, rebuilding the system.ini; scanreg /fix; running debug; fdisk /mbr. Good luck if you need assistance with any of these tasks post back and let us know how you are getting along.
November 19th, 2002, 12:42 PM
nanabass

I've already reinstalled WIN98 and a partial restore

Thanks for the replies. I've already ran reinstll of Win98 and done a partial restore to see if that fixes the problem. No new programs were installed when this problem occurred. I will uninstall Norton today and see if I can get my definitions updated so I can scan for opasrv virus.
I'll try to get the autoexec.bat and config.sys file contents posted later today.
November 19th, 2002, 02:19 PM
nanabass

Contents of Config.sys and Autoexec.bat

Config.sys reads
DEVICE=C:\essolo.sys
Rem TShoot: DOS=SINGLE
REM TShoot: DOS=HIGH, UMB
TEM TShoot: Device=D:\WINDOWS\Himem.sys
DeviceHigh=C:\WINDOWD/EMM386.Exe

Autoexec.bat reads
C:\>C:\essolo.com
ESS PCI Audio Dos Devise Setup Utility, Version 2.11C
<c>Ess Technology, Inc. 1996-1998 All Rights Reserved
Solo
DMA Mode is ALI TDMA
Current Solo PCI IRQ:5 PCIO IO Base:B800
Current Solo SP Pro Game Settings:
SB 10=220h IRQ=5 DMA=1
MPU 401 10=330h
Game Port IO=201h
C:\>

Can't get my Norton to recognize my internet connection to update my subscriptions. Re-installed Norton and can't get it to recognize that I'm connected to my ISP.
IE and OE says Page Cannot be displayed and cannot poll for messages.
November 19th, 2002, 02:38 PM
Calpitor

Try renaming autoexec.bat and config.sys through DOS first
November 19th, 2002, 08:59 PM
AlaricD

Re: Contents of Config.sys and Autoexec.bat

Quote:

Originally posted by nanabass
Config.sys reads
DEVICE=C:\essolo.sys
Rem TShoot: DOS=SINGLE
REM TShoot: DOS=HIGH, UMB
TEM TShoot: Device=D:\WINDOWS\Himem.sys
DeviceHigh=C:\WINDOWD/EMM386.Exe

The problem was that HIMEM.SYS (the XMS manager EMM386.EXE requires) was REMmed out. Remove the REM TShoot: DEVICE=D:\WINDOWS\HIMEM.SYS and replace it with DEVICE=D:\WINDOWS\HIMEM.SYS or DEVICE=C:\WINDOWS\HIMEM.SYS, depending on which directory actually contains HIMEM.SYS.
November 19th, 2002, 09:56 PM
markp62

One other minor detail, modify the REM TShoot: DOS=HIGH, UMB to DOS=HIGH, UMB
November 20th, 2002, 05:07 AM
mbatiri

You must have following lines prior to any lines in your config.sys:
device = c:\windows\himem.sys
device = c:\windows\emm386.exe /noems
dos = high,umb
Please look at the correct spelling.
It will solve your problem.
November 20th, 2002, 01:00 PM
nanabass

Formatted C, D drive still not recognized

I simply got tired of nothing working so I formatted the C drive and used my HP Simple backup. Everything looks good now with the exception of my D drive still not being recognized. I use it for backup of documents and photos. How can I get the drive to be recognized. Step by step instructions would be great. I renamed my HP CDRW drive to E.
Thanks for all of your suggestions and I will look to see that the HIMEM config is set properly.:p
November 20th, 2002, 05:36 PM
AlaricD

Is your 'D' drive another logical drive on your hard drive, a separate physical hard drive, or a CDROM drive?
November 20th, 2002, 07:55 PM
nanabass

Separate hard drive

My secondary drive is a separate hard drive, only 2MB.
I tried to add the strings in config.sys but when rebooting it said they were bad commands
When in DOS I can't type config.sys and get anything but a bad command
What am I doing wrong, I gave my dos for dummies away and now I could use it. I've fogotten all my dos commands
:confused:
November 20th, 2002, 08:12 PM
Calpitor

Check your BIOS is the drive seen here? What options in th BIOS do you have as far as storage go?
November 20th, 2002, 10:47 PM
AlaricD

Re: Separate hard drive

Quote:

Originally posted by nanabass
My secondary drive is a separate hard drive, only 2MB.
I tried to add the strings in config.sys but when rebooting it said they were bad commands
When in DOS I can't type config.sys and get anything but a bad command
What am I doing wrong, I gave my dos for dummies away and now I could use it. I've fogotten all my dos commands
:confused:

2MB or 2GB? 2MB is awful small, and might be an RLL or MFM drive... I'm guessing you meant 2GB due to the rarity of such old drives.

As was suggested before, check your BIOS settings. You may want to make sure the port to which it is connected (Primary Slave or Secondary Master or Secondary Slave) is set for Auto detection.

To EDIT the CONFIG.SYS, just type EDIT CONFIG.SYS when at the C:\> prompt. Or, you can go to Start, Run and type sysedit if you're in Windows. (In fact, do that and copy/paste the contents of CONFIG.SYS into a post here, so we can see exactly what's in there.)

Those "For Dummies" books are great-- but for a pretty good DOS reference on the web you could try Vernon Frazee's DOS help.
November 24th, 2002, 12:30 PM
nanabass

D Drive is back, cable problem

I took the computer apart, cleaned it and disconnected the cable from the Atapi CD Rom but left it connected to my secondary drive D. Started up several times and the D drive was there everytime. The connection to the Atapi cd rom was bad. All seems to be working properly so far. Good thing we have the laptop to use or I would have really been in trouble.
Thanks for all your help.:cool:
December 7th, 2002, 02:11 AM
eddiemunoz

emm 386 not installed

check config.sys file. This can be done by going to start and select run, type in msconfig. Click tab config.sys. Himem.sys should load before emm386. Select Himem.sys and click on move up button to place it above emm386.