[RESOLVED] How do I access DOS on A7A133?

Train....you did it again...!! I went back once again to the manual that I had to download in pdf....and this time, I understood about the settings for using regular jumper mode...and sure 'nuff...the first 4 dip switches control ram freq. I can choose different ram freq. settings...So I think this is how the ram can be put on a "divider".

Then the dip switches 6-9 is where I choose which multiplier. I will try x10 first....and then I can try x11 or x12 if I need to.

Dip switch #10 is the cpu ratio on/off switch...I'll choose 'on'.

Okay...I'll shut down...re-set the dip's...and see what choices bios gives me and see how things adjust....wish me luck...

Once you set the jumpers, you can not change things in BIOS so to speak of..

My trick is to read those manuals about 4 times, then read it again. That is about when the instructions fall into place. :(

So all can find and read the manual. Jist input that A7A133 it the top left search box.
http://support.asus.com/download/dow...Language=en-us

Now this is a hot link!
http://dlsvr01.asus.com/pub/ASUS/mb/...a7a133-100.pdf

Train...you are correct...it's an "either/or" selection....:( !! I thought that I could set the ram freq. to a lower number and still be able to up the speeds. Nope...no-can-do.. Oh well, it was worth trying.

Sorry about not posting the link to the manual...I didn't think about you or others would want to look at the manual to see what it said about the dip's...short sighted on my part...:o

I will probably ease back up to about 1900 Mhz and keep it there for a while...see if it runs stable. I still have fan holes to cut...multi-reader/floppy to buy...dvd/cd-r/rw to buy....fan controller to turn down the cpu fan so it's quieter....several more weeks before it's finished.

It's been fun messing with the o/c'ing....I am satisfied with the results...and like lgbpop said....it's still just an XP....but it's like having an old classic vehicle...it's fun to see what you can do to it.

I still have fan holes to cut.

Side panel OK, but anywhere else, strip the case. Cause the metal particles will short everything out.

Buying can be fun too. ;)

Think you got the best of it now. And even though it is a bit older, it still runs :D :D :D

Quote:

---

....it's still just an XP....

---

It's yesterday's technology, but it's no slouch either. Upgrade to a Barton-cored XP down the road, you'll see a big difference.

I will definitely strip the case before cutting holes...thanks for re-inforcing what I knew would be the safest thing to do. It would be a real waste ( not to mention real stupid) to ruin a good board and other good parts because I was too lazy to dis-assemble the case. I will admit that I thought about just stuffing some t-shirts or something like that into the case to try and keep any metal shavings away from the parts. Not one of my brighter moments!!

Even though it's an older rig, it will be a very nice system for basic use...I have been using this almost exclusively for the past couple of weeks and I'm impressed with how well it runs. Of course, the few upgraded parts is why it's running so well.

Make a good file server! Throw a ATA 100/133 card in it and 4 of them there 750GB hdds and you would be right ready!

lgbpop and Train.....I thought that y'all would like to know that I have the chip at 1945Mhz...FSB at 156...Bus speed at 311. It just completed over 10 hrs. of Prime95 stable...no errors...:) :) :) !! All I had to do was just bump up the Vcore one increment...it started out at 1.585...now it's 1.600. The temp under Prime95 load when I got home a few minutes ago was 42c.:D But the room temp is rather cool right now...about 60 F....idle temp right now is 38c. 10 hrs. of Prime95 also means that the PC133 ram is handling the increase in it's speed just fine.

lgbpop...suggesting the Mobile chip is working out great...thanks...:)

Train...this has been so much fun that once I get this rig delivered to my daughter, I might start slowly gathering some more components ( will need everything...case...psu..all parts.) and put together a file server.

Heck, you're getting better results than I have.http://www.taurusclub.com/forum/html...cons/whine.gif Those numbers sound good. Thanks for the update.

After you get your server built, you'll have to build another computer to hitch up to it.;)

And he wondered why some of us have about a half dozen computers. :D


Now, to save having to get a monitor, KB and mouse[ $$$], get a KVM switch.
OH, welcome to the club ;) ;D

I will definitely get a KVM switch...sure has been a hassle switching cables back & forth as I've been working on this build....just haven't ordered one yet. I have already looked at some on Newegg...do y'all have any particular ones that you would recommend? About all I can go by are the reviews...so your personal recommendations would be appreciated. I went to the local Radio Shack/computer store recently and they wanted nearly $60.00 for a KVM...I nearly choked!!

Yea...I know, I'm slightly hooked..:p ..it's like the overclocking...once you start, you can't stop...you just gotta find out if you can get just a few more Mhz's...:D

Thankfully, I'm not a gamer...!!

Trendnet is the brand I like.
And I am using the TK-400K KVM which comes with the cables
http://www.newegg.com/Product/Produc...82E16817107244
Gots to watch it as normally the cables are EXTRA! Read $$$$$

More of that Brand
http://www.newegg.com/Product/Produc...ubCategory=143
All kinds of hookups too.

Other brands of KVM switches
http://www.newegg.com/ProductSort/Su...Mouse-Switches

OOPS! Should have said all I have to do is hit-> ScrLk -> ScrLk -> arrow key
to change computers. Nice and easy. :)

Thanks...I had looked at the Trendnet's...right now all I need is a two computer switch. The $22.00 one looks good. I had read reviews where the cables were too short so I want to be sure that the cables are long enough to go about two feet or more. Here is one that I liked...

http://www.newegg.com/Product/Produc...82E16817107407

I'll look at those two or three some more and will order one shortly.