Printable View
https://discussions.virtualdr.com/ It's annoying to me, because not only did I have enough trouble just finding the place where they were supposed to be, but also with my own spelling. https://discussions.virtualdr.com/
But I did find and check out that overclockin' part of the Video Card. https://discussions.virtualdr.com/ Fixing to test aaaalllll the way over to the right.
"Which ones did you not find ? That 8 tap Anistropic was the only one I have not been able to find."
Mosaic,
Well! GOOD ! Thank you. I thought even I had spelled it wrong too, but then after you posted that I got out bistro's tweak sheet and that's where I got that spelling from.
Then he spelled it that way again:
"Don't worry about that 8-bit anistropic setting--not available on later versions I found out. The anistropic filtering setting in NVMax and/or Display Properties (OpenGL tab) takes care of it."
SO ! Bistro was right ! .....why does this not surprise me ? https://discussions.virtualdr.com/
[This message has been edited by Queen_of_Hearts (edited 03-04-2001).]
Howdy all
jr is on the net and through a Router.
My do things load faster. Like it though.
Did not even have to install the @home junk.
QOH
I have seen one fireball in the sky. Please not another one. Thelast I know was you isp.
And I figure the next one will be closer to home.
------------------
SMILE
and post back
Whut? https://discussions.virtualdr.com/ ya think I should leave well enough alone, Train ? Never have been known to do that. https://discussions.virtualdr.com/
Do you feel any different ? Your's probably does but since I am looking at the same monitor I forget sometimes...UNTIL it's time to open up a BIG program. Then I KNOW where I am.
QOH
If you decide for a bigger, go for the 19".
I should have got 2.
The 17 is okay, but you have better screen control, I am sitting back and reading it from 3 feet away. On compaq now. Just turn my head and reading your post on jr. https://discussions.virtualdr.com/
Never said anything about leaving things alone!! https://discussions.virtualdr.com/ https://discussions.virtualdr.com/
Just tansfering a web address here. http://www.microsoft.com/windows/ie/...d/ie501sp1.htm
------------------
SMILE
and post back
Now have IE5.01SP1 and all updates.
Did it while waiting for 1.18MB of favorites to transfer to a floppy.
------------------
SMILE
and post back
ve haf created a monstor Egor? https://discussions.virtualdr.com/ I knew we could depend on the QoH. Next, overclocking the world. Hee Hee https://discussions.virtualdr.com/ https://discussions.virtualdr.com/ Sure am glad I think she is on our side. https://discussions.virtualdr.com/ I don't know why but I just could not resist that.
Been busy with stuff. Feel real good again now. Two times enough.
------------------
Seek Knowledge First and All Else Will Follow
greengoose
now that smarts. You posted the above and I did not have my seatbelt fastened and banged my head when I hit the floor laughing.
As Mosaic is to regs
as QOH will be to oc ing
------------------
SMILE
and post back
QoH: Be real careful overclocking that Herc card. You'll probably be able to go as far as 190/190--don't go any further or you'll get break-ups (not to mention you could burn up the card). You need at least a fan on the heat sink and probably some ram (heat) sinks. There are cooling kits out there to modify a GeForce 2 MX card for overclocking (www.2cooltek.com). Until you are ready for that, keep it at normal. My overclocking (190/190) was done AFTER installing a fan on the heat sink and a "nautilus" fan blowing a lot of air onto the vid card. Otherwise, I wouldn't have tried it.
Using a electronic probe while running 3D Mark My video heatsink hit and held 40 Degrees C.
But my cpu hit 35 C.
bistro
Ya needs to get that camera fo sure now.
------------------
SMILE
and post back
I'm trying, I'm trying! https://discussions.virtualdr.com/ Got a few more case mods to do--"blowhole" on the top with medium Panaflo fan and replace intake with a large Panaflo fan--regular size Panaflo for exhaust. Going to replace the power supply fan with a Panaflo also (seems to be a lttle weak). Weather service is going to detect this case as a new hurricane comin' in. (But Panaflo's are reaaaallll quiet). Should get them in the mail tomorrow.
QoH: Remember that any 3dMark score over 3000 (default settings) is good-to-go with any 3D game out there. Everything thing above that is just bragging rights. Don't burn up that nice card now, hear? https://discussions.virtualdr.com/
Nite all!
aaawwwwww...I'm not doin' it. I was just teasin' ya https://discussions.virtualdr.com/
I won't be moving any of those settings without your permission.
I do have the Cyclone blowing right on the Video card in the first PCI slot. I don't see how a fan on the heatsink could fit in between the Cyclone and the Video card. I'd have to move the Cyclone fan over one slot and waste two then? The one the Cyclone would be over and the one in between it and the Video card.
The Sound card is currently in the second PCI slot.
Did the overclocking make that big of a difference ?
[This message has been edited by Queen_of_Hearts (edited 03-04-2001).]
Know we know. That is for sure.
bistro can see a oc case from a picture on the web. And talk about going for something,?
So, we did not do so bad after all https://discussions.virtualdr.com/
going to follow his lead
SO
Night all!!
------------------
SMILE
and post back
wintune at www.winmag.com
in left hand pane.
--------------------------------------------------------------------------------
CPU (1) AMD Athlon @ 808 MHz
Video Board NVIDIA GeForce2 MX
Video Mode 1024x768@16 bits/pixel
RAM 128 MB
OS Windows 98 4.10.2222 A
Browser Microsoft Internet Explorer 4.0 (compatible; MSIE 5.01; Windows 98)
Area Tested Value % of Ref* % of Avg+
CPU Integer 2465 MIPS 127 % 100 %
CPU Floating Point 1010 MFLOPS 131 % 100 %
CPU Advanced Integer 201.4 119 % 104 %
CPU Advanced Floating Point 255.7 155 % 103 %
CPU Advanced MMX 196.9 117 % 103 %
Video (2D) 145.4 MPixels/s 134 %
Direct3D Windowed 179.1 MPixels/s 88 %
Direct3D Null 282.2 90 %
Direct3D Primary 60.9 28 %
OpenGL 27.4 MPixels/s 16 %
Memory 2125 MBytes/s 155 % 103 %
Cached Disk C:\ 128 MBytes/s 97 % 75 %
Uncached Disk C:\ 2.2 MBytes/s 62 % 57 %
--------------------------------------------------------------------------------
Higher numbers are better. This data has not been saved permanently in the database. You can save it now if you wish.
*The reference machine is currently a 667 MHz Pentium III with 128 MB of RAM and an NVidia GeForce video board with 32 MB of video RAM. The reference values were measured under Windows 98.
OK, now nite,nite. https://discussions.virtualdr.com/
------------------
SMILE
and post back