Printable View
Looking good....
It's really a personal choice for TIM...most of the major brands are very good. I seem to recall that Krazy Glue was NOT a good choice, but I could be wrong....short cure time though.
Reader beware: The above statement just might be sarcasm...
Supersparks, just curious about what type of computing you are doing with the water cooled system that you have built? Thanks for the info, Bob :)
All kinds. I wanted a general purpose workstation that I could throw pretty much any task at. On my previous Core 2 rig I found I was constantly hitting the hardware buffers, especially when running virtual machines. This rig has coped admirably with everything I've done so far :) :)
After a decent period to allow the AS to cure, I have now run the first stress test using OCCT, on standard clock and voltage settings. This is the hottest core (by 1 degree), as you can see it just briefly touched 66C :) :)
https://discussions.virtualdr.com/im.../2009/12/7.png
The coolant temp rose from 27C to 28C.
And here is the graph with the identical overclock settings to the point where is where I was forced to leave things on air cooling as it was on the very edge of TJ Max. I've still got another 27C of headroom :) :) :)
https://discussions.virtualdr.com/im.../2009/12/5.png
Quote:
Originally Posted by Robertjr
And afterwards he's gonna do a test run out on the Bonneville Salt Flats to see how fast it'll go.... VROOOMM!Quote:
Originally Posted by SuperSparks
:D
Temps are lookin' good...
[QUOTE=bistro;1308355]And afterwards he's gonna do a test run out on the Bonneville Salt Flats to see how fast it'll go.... VROOOMM!
:D
:D put wings on it and he can fly it.. :)