Printable View
If only the rest of us spoke multiple languages. You're doing great.Quote:
I am not so good in this language, so I have to translate
I'll let the other questions, power supply, etc., wait until we get the results from your administrative tools setup and the event log.
So, I found it at last.Have only two repeating tipes of failures
Service control manager 7034, no category, user - not correct
System error 1003,category(102), user - not correct.
Have no idea what the hell this is.
Lisa,
I've searched the Microsoft knoledge base for both of your error messages and got no hits. I don't know if the exact phrase you received is how you wrote it here but if not, re-post it exactly as it is displayed and I'll search again.
I doubt that those two errors are the cause of your problem though. Both probably refer to a setup of users in XP which weren't completed. Not being familiar with XP as I said before is a problem so we need SuperSparks input on that.
I still think you may have a hardware issue and the power supply seems like a place to start.
You have no conflicts showing, have tried vga, it happens in all apps, on-line as well as off, have had this happen with different OS's and the only thing you haven't checked or replaced it seems is the power supply.
There are a couple of ways to go about this.
1. Even though your paperwork is lost it shouldn't disqualify you from warrenty work from a reputable dealer. You've had it in 3 times so they have a record of the machine. Be stubborn!
2. Here, a decent power supply runs between $25.00 and $75.00 so buying and installing a new supply is a possibility but of course you may wind up buying one for nothing.
3. Finding a proper one from another machine as a test.
If you decide to buy, make sure you get 300 watts as a minimum. There are ways to bench test the current power supply but I doubt you have the equipment.
I assume you have either a ATX or microATX supply right now. I won't go into detail here but you need to make sure you test with the same kind or buy the same kind. If in doubt take the specifications off the label on the power supply to the store.
I hate to say this but you might be better off going to the dealer that built it even though you aren't happy with them but they will know what you have.
I just re-read your original post. It says they adjusted the memory not replaced it. Is that correct? If so what did they tell you they did? It doesn't make much sense. You said you tried different memories but I'm not sure if you mean what the store did or not.
I see your motherboard (unless they didn't put the same board type back in) will take a maximum of 512 MB's of sdram. Do you have 512 MB's? 256? 128? What configuration do you have? One stick or two sticks of 128? 256?
I ask because it's a simple matter of removing one stick to test the system then remove the 2nd stick and replace the first for another test. If one is bad that could be your problem. If you only have one stick then of course you'll need to find another.
Sorry, a lot written here but this repair shop hasn't done you any favors and with our language barrier I wanted to be as specific as possible, OK?
In your text file I see only one thing that is interesting and that's the Dynamic Host Configuration Protocol (DHCP)
I have no idea what Keine means. The rest I can figure out.
Basically DHCP is a protocal that automates TCP/IP and can automatically take over assigning IP adressing. Depending on how it's set up it can be a nice tool or a real headache.
I'm going to wait and see if SuperSparks comes back to this thread since he's the XP guru but if it's not the hardware you've replaced and not the power supply then it's possible it's tied to the high speed internet network setup. Either hardware or configuration.
Do you have a dial up modem also so that you can disconnect the cable and shutdown / remove that access?
Sorry, "keine" means "no", "nothing".
Yes, I have a modem, so I´ll try this immediately.
Sorry, people, I've only just got back in.
I agree, those error messages are unimportant. That means we can reasonable rule out OS or software problems as the cause and concentrate on the possible hardware problems.
I go along with all griffinspc's suggestions so far.
Hmm, I ´ve disconnected the cable and runned first a simple grafic program, then a game. Well, I was outrageously kicked out.
With the same failure in the protocol.
Lisa, I may have been a bit hasty, I've been double checking and there may be something in that Event 1003. Please could you open Event Viewer again and double click that System Error 1003, and a box called "Event Properties" should pop up. If you could then paste the results here it would help me as I'm finding it hard to find information on that particular event.
What I have found so far has made an unconfirmed reference to graphics card problems.
What I need is something like this (I just took it at random from my System Log):
Event Type: Warning
Event Source: W32Time
Event Category: None
Event ID: 36
Date: 09/01/2003
Time: 15:27:37
User: N/A
Computer: XP-PRO-1
Description:
The time service has not been able to synchronize the system time for 49152 seconds because none of the time providers has been able to provide a usable time stamp. The system clock is unsynchronized.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
If you double-click the Event 1003 it should bring up an Event Properties box, just below the two arrows is a button to copy the contents to the clipboard, click that and then paste the results here.
Event Type: Warning
Event Source: W32Time
Event Category: None
Event ID: 36
Date: 09/01/2003
Time: 15:27:37
User: N/A
Computer: XP-PRO-1
Description:
The time service has not been able to synchronize the system time for 49152 seconds because none of the time providers has been able to provide a usable time stamp. The system clock is unsynchronized.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Ereignistyp: Fehler
Ereignisquelle: System Error
Ereigniskategorie: (102)
Ereigniskennung: 1003
Datum: 09.01.2003
Zeit: 19:20:49
Benutzer: Nicht zutreffend
Computer: LISA
Beschreibung:
Fehlercode 10000050, 1. Parameter c5abc5b2, 2. Parameter 00000001, 3. Parameter bf9a8e8b, 4. Parameter 00000000.
Weitere Informationen über die Hilfe- und Supportdienste erhalten Sie unter http://go.microsoft.com/fwlink/events.asp.
Daten:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 35 1000005
0020: 30 20 20 50 61 72 61 6d 0 Param
0028: 65 74 65 72 73 20 63 35 eters c5
0030: 61 62 63 35 62 32 2c 20 abc5b2,
0038: 30 30 30 30 30 30 30 31 00000001
0040: 2c 20 62 66 39 61 38 65 , bf9a8e
0048: 38 62 2c 20 30 30 30 30 8b, 0000
0050: 30 30 30 30 0000
It is the same in the other attashment.
If you need to translate sth, I am here.
No it's OK, I can see what I need to see. I'm going to see what I can find on the Internet. I may be a while.
There's some stuff here to be getting on with:
http://groups.google.com/groups?hl=e...50&sa=N&tab=wg
Yeah, I see I am not alone. But there is nothing for solving the problem or I don´t understand it.
Hi Lisa,
I've had a most frustrating time trying to get to the bottom of that error. I hunted high and low on the web, and I just can't find any information at all - the annoying thing is that it'll point to the hardware or driver that's causing the problem, if only we could find out what it's supposed to mean. This is typical Microsoft, they give you a wonderful resource in the form of the Event Viewer, and then don't give you enough information to be able to use it when you need to. And BillyG reckons Windows is easier to use than Linux :confused:
One other thing I need to know is if you've been having any Stop errors at all, if so can you tell me what they were?
Ereignistyp: Fehler
Ereignisquelle: Service Control Manager
Ereigniskategorie: Keine
Ereigniskennung: 7034
Datum: 08.01.2003
Zeit: 15:48:58
Benutzer: Nicht zutreffend
Computer: LISA
Beschreibung:
Dienst "Konfigurationsfreie drahtlose Verbindung" wurde unerwartet beendet. Dies ist bereits 1 Mal passiert.
Weitere Informationen über die Hilfe- und Supportdienste erhalten Sie unter http://go.microsoft.com/fwlink/events.asp.
Ereignistyp: Fehler
Ereignisquelle: Service Control Manager
Ereigniskategorie: Keine
Ereigniskennung: 7031
Datum: 08.01.2003
Zeit: 15:48:58
Benutzer: Nicht zutreffend
Computer: LISA
Beschreibung:
Der Dienst "Windows-Zeitgeber" wurde unerwartet beendet. Dies ist bereits 1 Mal vorgekommen. Folgende Korrekturmaßnahmen werden in 60000 Millisekunden durchgeführt: Starten Sie den Dienst neu..
Weitere Informationen über die Hilfe- und Supportdienste erhalten Sie unter http://go.microsoft.com/fwlink/events.asp.
That´s all I have different than info or some warnings.
For Microsoft you are right, yes, they are giving you something, but the rest you have to buy. For example - Herdware and driver test or how it is called. 250$ .La-la-la !