Printable View
Hi gang,
Trying to use the prnctl.vbs script supplied with XP.
http://technet.microsoft.com/en-us/l.../bb490976.aspx
While it works beautifully on local computers, I can't get it to work on any networked computer. I am very certain that I have input the -s, -u & -w parameters correctly. And I have tried it on 2 different physical networks. Any idea?
It may be a permissions problem. Are you specifying a username and password for a valid user account that has admin rights on the remote computer?
Yes and that's why I can't figure out why it is not working.Quote:
Originally Posted by jdc2000
You might have to use some specialized monitoring software to see what, if anything, is happening when you try the command. You would need to verify that the remote computer is being connected to and the appropriate command sent, and that it is being run. You could check the event viewer logs, but there may not be anything there.
I assume that you have tried the command on the remote computer while actually physically at that computer and it works.
Yes.Quote:
Originally Posted by jdc2000
Try connecting two test computers directly with a crossover cable. Make sure all firewalls are turned off.
Sorry for taking so long to get back at this.
Would it be possible that the reason the script doesn't work is b/c the computers are in a workgroup instead of a domain?
I did not see any requirement that the computers involved be part of a domain.
This is strange. I have now tried all the computers on the same network and the result is the same. The script works if only I run the script directly on a computer. It fails when running it from a networked computer. The network is fine AFAIK ... they can ping each other and share files, etc.
I am not good with VBS at all, maybe you script gurus here can look at the script (%windir%\system32\prnqctl.vbs) and tell me what I am doing wrong.
Prnqctl.vbs
Prints a test page, pauses or resumes a printer, and clears a printer queue. Used without parameters, prnqctl.vbs displays command-line help for the prnqctl.vbs command.
-s RemoteComputer : Specifies, by name, the remote computer to which the printer on which you want to print a test page is attached. If you do not specify a computer, the local computer is used.
Possibly where the errors are made.
Post the full script.
As Train mention - post an example of the script.
Are the printers litteraly attached to the computers in question?
Are you trying to pause a 100 page doc and not a three page doc that gets sent to the printer's memory faster then you can pause the printer?
Are you getting an error message with important info in it?
Just to be clear, this is not my script. It is supplied w/ XP (found in the Windows\System32 folder.) I cut-&-paste the script here at the end of this post.
This is what I have been trying.
First, I run the script on a local computer (C1).
The printer in question (PT) is connected to C1 directly via usb . PT is share across the network.
The script works perfectly. I can Print a test print (-e); pause printing (-z); cancel all spooled print jobs (-x) and resume printing (-m).
Now I go to a networked computer (N1), run the same script on N1 but this time I add -s C1 -u falcon2000 -w mypassword to the command line. Nothing will happen. No error nessage, nothing.
And, no, it is not because the print jobs spooled faster than I can stop them. I purposefully send out a good number of large image files just so I can monitor the print queue.
Code:'----------------------------------------------------------------------
'
' Copyright (c) Microsoft Corporation. All rights reserved.
'
' Abstract:
' prnqctl.vbs - printer control script for WMI on Whistler
' used to pause, resume and purge a printer
' also used to print a test page on a printer
'
' Usage:
' prnqctl [-umex?] [-s server] [-p printer] [-u user name] [-w password]
'
' Examples:
' prnqctl -m -s server -p printer
' prnqctl -x -s server -p printer
' prnqctl -e -b printer
'----------------------------------------------------------------------
option explicit
'
' Debugging trace flags, to enable debug output trace message
' change gDebugFlag to true.
'
const kDebugTrace = 1
const kDebugError = 2
dim gDebugFlag
gDebugFlag = false
'
' Operation action values.
'
const kActionUnknown = 0
const kActionPause = 1
const kActionResume = 2
const kActionPurge = 3
const kActionTestPage = 4
const kErrorSuccess = 0
const KErrorFailure = 1
const kNameSpace = "root\cimv2"
'
' Generic strings
'
const L_Empty_Text = ""
const L_Space_Text = " "
const L_Error_Text = "Error"
const L_Success_Text = "Success"
const L_Failed_Text = "Failed"
const L_Hex_Text = "0x"
const L_Printer_Text = "Printer"
const L_Operation_Text = "Operation"
const L_Provider_Text = "Provider"
const L_Description_Text = "Description"
const L_Debug_Text = "Debug:"
'
' General usage messages
'
const L_Help_Help_General01_Text = "Usage: prnqctl [-zmex?] [-s server][-p printer][-u user name][-w password]"
const L_Help_Help_General02_Text = "Arguments:"
const L_Help_Help_General03_Text = "-e - print test page"
const L_Help_Help_General04_Text = "-m - resume the printer"
const L_Help_Help_General05_Text = "-p - printer name"
const L_Help_Help_General06_Text = "-s - server name"
const L_Help_Help_General07_Text = "-u - user name"
const L_Help_Help_General08_Text = "-w - password"
const L_Help_Help_General09_Text = "-x - purge the printer (cancel all jobs)"
const L_Help_Help_General10_Text = "-z - pause the printer"
const L_Help_Help_General11_Text = "-? - display command usage"
const L_Help_Help_General12_Text = "Examples:"
const L_Help_Help_General13_Text = "prnqctl -e -s server -p printer"
const L_Help_Help_General14_Text = "prnqctl -m -p printer"
const L_Help_Help_General15_Text = "prnqctl -x -p printer"
'
' Messages to be displayed if the scripting host is not cscript
'
const L_Help_Help_Host01_Text = "Please run this script using CScript."
const L_Help_Help_Host02_Text = "This can be achieved by"
const L_Help_Help_Host03_Text = "1. Using ""CScript script.vbs arguments"" or"
const L_Help_Help_Host04_Text = "2. Changing the default Windows Scripting Host to CScript"
const L_Help_Help_Host05_Text = " using ""CScript //H:CScript //S"" and running the script "
const L_Help_Help_Host06_Text = " ""script.vbs arguments""."
'
' General error messages
'
const L_Text_Error_General01_Text = "The scripting host could not be determined."
const L_Text_Error_General02_Text = "Unable to parse command line."
const L_Text_Error_General03_Text = "Unable to get printer instance."
const L_Text_Error_General04_Text = "Win32 error code"
const L_Text_Error_General05_Text = "Unable to get SWbemLocator object"
const L_Text_Error_General06_Text = "Unable to connect to WMI service"
'
' Action strings
'
const L_Text_Action_General01_Text = "Pause"
const L_Text_Action_General02_Text = "Resume"
const L_Text_Action_General03_Text = "Purge"
const L_Text_Action_General04_Text = "Print Test Page"
'
' Debug messages
'
const L_Text_Dbg_Msg01_Text = "In function ExecPrinter"
const L_Text_Dbg_Msg02_Text = "Server name"
const L_Text_Dbg_Msg03_Text = "Printer name"
const L_Text_Dbg_Msg04_Text = "In function ParseCommandLine"
main
'
' Main execution starts here
'
sub main
dim iAction
dim iRetval
dim strServer
dim strPrinter
dim strUser
dim strPassword
'
' Abort if the host is not cscript
'
if not IsHostCscript() then
call wscript.echo(L_Help_Help_Host01_Text & vbCRLF & L_Help_Help_Host02_Text & vbCRLF & _
L_Help_Help_Host03_Text & vbCRLF & L_Help_Help_Host04_Text & vbCRLF & _
L_Help_Help_Host05_Text & vbCRLF & L_Help_Help_Host06_Text & vbCRLF)
wscript.quit
end if
'
' Get command line parameters
'
iRetval = ParseCommandLine(iAction, strServer, strPrinter, strUser, strPassword)
if iRetval = kErrorSuccess then
select case iAction
case kActionPause
iRetval = ExecPrinter(strServer, strPrinter, strUser, strPassword, L_Text_Action_General01_Text)
case kActionResume
iRetval = ExecPrinter(strServer, strPrinter, strUser, strPassword, L_Text_Action_General02_Text)
case kActionPurge
iRetval = ExecPrinter(strServer, strPrinter, strUser, strPassword, L_Text_Action_General03_Text)
case kActionTestPage
iRetval = ExecPrinter(strServer, strPrinter, strUser, strPassword, L_Text_Action_General04_Text)
case kActionUnknown
Usage(true)
exit sub
case else
Usage(true)
exit sub
end select
end if
end sub
'
' Pause/Resume/Purge printer and print test page
'
function ExecPrinter(strServer, strPrinter, strUser, strPassword, strCommand)
on error resume next
DebugPrint kDebugTrace, L_Text_Dbg_Msg01_Text
DebugPrint kDebugTrace, L_Text_Dbg_Msg02_Text & L_Space_Text & strServer
DebugPrint kDebugTrace, L_Text_Dbg_Msg03_Text & L_Space_Text & strPrinter
dim oPrinter
dim oService
dim iRetval
dim uResult
iRetval = kErrorFailure
if WmiConnect(strServer, kNameSpace, strUser, strPassword, oService) then
set oPrinter = oService.Get("Win32_Printer.DeviceID='" & strPrinter & "'")
else
ExecPrinter = kErrorFailure
exit function
end if
'
' Check if getting a printer instance succeeded
'
if Err.Number = kErrorSuccess then
select case strCommand
case L_Text_Action_General01_Text
uResult = oPrinter.Pause()
case L_Text_Action_General02_Text
uResult = oPrinter.Resume()
case L_Text_Action_General03_Text
uResult = oPrinter.CancelAllJobs()
case L_Text_Action_General04_Text
uResult = oPrinter.PrintTestPage()
case else
Usage(true)
end select
'
' Err set by WMI
'
if Err.Number = kErrorSuccess then
'
' uResult set by printer methods
'
if uResult = kErrorSuccess then
wscript.echo L_Success_Text & L_Space_Text & strCommand & L_Space_Text _
& L_Printer_Text & L_Space_Text & strPrinter
iRetval = kErrorSuccess
else
wscript.echo L_Failed_Text & L_Space_Text & strCommand & L_Space_Text _
& L_Text_Error_General04_Text & L_Space_Text & uResult
end if
else
wscript.echo L_Failed_Text & L_Space_Text & strCommand & L_Space_Text & L_Error_Text _
& L_Space_Text & L_Hex_Text & hex(Err.Number) & L_Space_Text & Err.Description
end if
else
wscript.echo L_Text_Error_General03_Text & L_Space_Text & L_Error_Text & L_Space_Text _
& L_Hex_Text & hex(Err.Number) & L_Space_Text & Err.Description
'
' Try getting extended error information
'
call LastError()
end if
ExecPrinter = iRetval
end function
'
' Debug display helper function
'
sub DebugPrint(uFlags, strString)
if gDebugFlag = true then
if uFlags = kDebugTrace then
wscript.echo L_Debug_Text & L_Space_Text & strString
end if
if uFlags = kDebugError then
if Err <> 0 then
wscript.echo L_Debug_Text & L_Space_Text & strString & L_Space_Text _
& L_Error_Text & L_Space_Text & L_Hex_Text & hex(Err.Number) _
& L_Space_Text & Err.Description
end if
end if
end if
end sub
'
' Parse the command line into its components
'
function ParseCommandLine(iAction, strServer, strPrinter, strUser, strPassword)
on error resume next
DebugPrint kDebugTrace, L_Text_Dbg_Msg04_Text
dim oArgs
dim iIndex
iAction = kActionUnknown
iIndex = 0
set oArgs = wscript.Arguments
while iIndex < oArgs.Count
select case oArgs(iIndex)
case "-z"
iAction = kActionPause
case "-m"
iAction = kActionResume
case "-x"
iAction = kActionPurge
case "-e"
iAction = kActionTestPage
case "-p"
iIndex = iIndex + 1
strPrinter = oArgs(iIndex)
case "-s"
iIndex = iIndex + 1
strServer = RemoveBackslashes(oArgs(iIndex))
case "-y"
iIndex = iIndex + 1
strUser = oArgs(iIndex)
case "-w"
iIndex = iIndex + 1
strPassword = oArgs(iIndex)
case "-?"
Usage(true)
exit function
case else
Usage(true)
exit function
end select
iIndex = iIndex + 1
wend
if Err.Number = kErrorSuccess then
ParseCommandLine = kErrorSuccess
else
wscript.echo L_Text_Error_General02_Text & L_Space_Text & L_Error_Text & L_Space_Text _
& L_Hex_Text & hex(Err.Number) & L_Space_text & Err.Description
ParseCommandLine = kErrorFailure
end if
end function
'
' Display command usage.
'
sub Usage(bExit)
wscript.echo L_Help_Help_General01_Text
wscript.echo L_Empty_Text
wscript.echo L_Help_Help_General02_Text
wscript.echo L_Help_Help_General03_Text
wscript.echo L_Help_Help_General04_Text
wscript.echo L_Help_Help_General05_Text
wscript.echo L_Help_Help_General06_Text
wscript.echo L_Help_Help_General07_Text
wscript.echo L_Help_Help_General08_Text
wscript.echo L_Help_Help_General09_Text
wscript.echo L_Help_Help_General10_Text
wscript.echo L_Help_Help_General11_Text
wscript.echo L_Empty_Text
wscript.echo L_Help_Help_General12_Text
wscript.echo L_Help_Help_General13_Text
wscript.echo L_Help_Help_General14_Text
wscript.echo L_Help_Help_General15_Text
if bExit then
wscript.quit(1)
end if
end sub
'
' Determines which program is being used to run this script.
' Returns true if the script host is cscript.exe
'
function IsHostCscript()
on error resume next
dim strFullName
dim strCommand
dim i, j
dim bReturn
bReturn = false
strFullName = WScript.FullName
i = InStr(1, strFullName, ".exe", 1)
if i <> 0 then
j = InStrRev(strFullName, "\", i, 1)
if j <> 0 then
strCommand = Mid(strFullName, j+1, i-j-1)
if LCase(strCommand) = "cscript" then
bReturn = true
end if
end if
end if
if Err <> 0 then
wscript.echo L_Text_Error_General01_Text & L_Space_Text & L_Error_Text & L_Space_Text _
& L_Hex_Text & hex(Err.Number) & L_Space_Text & Err.Description
end if
IsHostCscript = bReturn
end function
'
' Retrieves extended information about the last error that occured
' during a WBEM operation. The methods that set an SWbemLastError
' object are GetObject, PutInstance, DeleteInstance
'
sub LastError()
on error resume next
dim oError
set oError = CreateObject("WbemScripting.SWbemLastError")
if Err = kErrorSuccess then
wscript.echo L_Operation_Text & L_Space_Text & oError.Operation
wscript.echo L_Provider_Text & L_Space_Text & oError.ProviderName
wscript.echo L_Description_Text & L_Space_Text & oError.Description
wscript.echo L_Text_Error_General04_Text & L_Space_Text & oError.StatusCode
end if
end sub
'
' Connects to the WMI service on a server. oService is returned as a service
' object (SWbemServices)
'
function WmiConnect(strServer, strNameSpace, strUser, strPassword, oService)
on error resume next
dim oLocator
dim bResult
oService = null
bResult = false
set oLocator = CreateObject("WbemScripting.SWbemLocator")
if Err = kErrorSuccess then
set oService = oLocator.ConnectServer(strServer, strNameSpace, strUser, strPassword)
if Err = kErrorSuccess then
bResult = true
oService.Security_.impersonationlevel = 3
'
' Required to perform administrative tasks on the spooler service
'
oService.Security_.Privileges.AddAsString "SeLoadDriverPrivilege"
Err.Clear
else
wscript.echo L_Text_Msg_General06_Text & L_Space_Text & L_Error_Text _
& L_Space_Text & L_Hex_Text & hex(Err.Number) & L_Space_Text _
& Err.Description
end if
else
wscript.echo L_Text_Msg_General05_Text & L_Space_Text & L_Error_Text _
& L_Space_Text & L_Hex_Text & hex(Err.Number) & L_Space_Text _
& Err.Description
end if
WmiConnect = bResult
end function
'
' Remove leading "\\" from server name
'
function RemoveBackslashes(strServer)
dim strRet
strRet = strServer
if Left(strServer, 2) = "\\" and Len(strServer) > 2 then
strRet = Mid(strServer, 3)
end if
RemoveBackslashes = strRet
end function
I don't know if this would be a viable solution in your case or not, but you might consider taking remote control of the desired computer so you could actually run the script on the affected computer. That would eliminate the networking component from the script. Otherwise, you will need to use Process Monitor on both the computer you are trying to affect and the computer you are using to run the script, and watch what happens on each when you try the script.
This is actually what I am doing for now. It works OK but not the best for my situation ... being able to run the script from a networked computer like it is intended to will be the best. Just can't figure out why doesb't it work.Quote:
Originally Posted by jdc2000
I decided to try another printer on the same network. It works. So I look into this printer to see is there any difference in setup, etc. There is none. Finally, I realized that this is an older printer using parallel printer cable. The other printer I having been trying on is USB. This is the only difference.
So to test, I try the script on yet another uSB printer. No joy. After trying a few more times, it appears that I can successfully run the script from any computer targeting the parallel cable printer. But running the script targetting the any USB printer will fail.
Then I try again at home. At home, I have a wireless printer (built-in wireless print server.) The script runs successfully from any of my 4 computers.
But this is the thing. The script runs fine on the local computer to which a printer is directly connected either it is USB or parallel. So, seems to me that there is a problem using the script targeting a USB printer over wired network. Isn't it strange?!?!