Printable View
Hi,
I just bought an Asus A7N8X mobo (nForce2) with an AMD athlon xp 2400+ and some 333 ddram.
When I boot up and in windows too (2000 pro), it says my CPU is a 1800+.
I know I should change some settings in the BIOS, but I'm not sure which ones, and at which values.
I think my RAM is also erroneously detected, but I'm not sure. I'll check with SiSoft Sandra when I finish my drivers setup and such.
If anyone can lend a hand it'd be appreciated!
txs
D
Central Processing Unit FSB (CPU_USB)
The jumper when set to 1-2 pins (default), enable support for Front Side Bus 333/266. When set to pins 2-3, it sets support for FSB 200 only.
Jumper
Memory
Sockets # 1 & 3 or 2 & 3 or 1,2 & 3
Set Memory and Bus Frequency to AUTO
The Athlon xp 2400+ runs at 266 FSB frequency (default value is ok)
http://139.95.253.213/SRVS/CGI-BIN/W...xi=10,Case=obj(1224)
Still, it gets identified as a athlon xp 1800+.
That's why I'm sure there's some other setting to fiddle with, liek:
CPU EXTERNAL FREQUENCY 100 mhz by default
CPU multiple setting [auto]
CPU FREQUENCY MYLTIPLE [5.0X]
MEMORY FREQUENCY
This is under AWARD BIOS.
Hi Diabolus,
My guess is this setting:
CPU EXTERNAL FREQUENCY 100 mhz by default
Needs to be showing 133 mhz.
Limerick
Txs Limerick,
I'm gonna try it, but just how much of a guess is this? :D
It would be a shame to damage my brand new system. . .
I never could be sure anyway of what external frequency was actually affecting, so I didn't dare touch it.
Do you have PC2700 ram? If so, in Bios you should be able to select 166/33 for System/PCI Frequency Ratio and no you will not hurt it if you decide to select 133/33 instead. The FSB will just run at 266 instead of 333 is all. All you would be doing is underclocking the system.
I was wondering what the heck was the difference between pc2100 or pc2700 and found this thread:
http://www.sysopt.com/forum/showthre...hreadid=126431
So, I have pc2700. I bought 2 * 256 mb 333mhz RAM
Now, I just have to try and set it correctly without busting anything.
I didnt buy this for underclocking, I HAVE to try and get the most of it.
Txs, you were right on the spot.Quote:
Originally posted by Limerick
Hi Diabolus,
My guess is this setting:
CPU EXTERNAL FREQUENCY 100 mhz by default
Needs to be showing 133 mhz.
Limerick
changing from 100mhz to 133mhz made jump from 1800+ to 2400+.
Now, I gotta check my memory and agp speeds.
Have questions on ram, try Crucial's library Lots of answers there.
Hi Diabolus!
I have put my CPU external ferquency to 133mhz, as it is half of my Athlon XP 2000 FSB (266mhz) and your XP 2400. In this respect, please follow the Asus board manual instructions.
Therefore, with that CPU external frequency, when I start my PC it recognizes my CPU as an AMD XP 2000, nevertheless my DDR does not have a 333mhz frequency, but only 133mhz(it is Sync with the processor frequency). Now, I dont believe it is possible to put the memory to 333mhz, since the maximum memory frequency you can get is 266 and setting the memory multiplier by 200% in relation of the CPU external frequency, which I dont recommend.
Yes, its true what you are thinking... it is not worth to buy DDR333 with a CPU FSB of 266....
Hope I helped you out...
Rgds,
Blankrice