Printable View
Hi, I have just managed to connect 2 pc's using a a crossover cable, but now want to connect another 2. I am using ICS, but am a bit confused as to whether I need a switch or a hub. Could someone clarify this and tell me what would be best.
Thanks in advance
Caz:confused:
No doubt in that u have to go for either a hub or a switch.
want to configure your NIC,assign the IP address,and make a machine as server for your DNS if u you want to share a internet connection.
try pppshar it is better than ICS.
http://www.pppindia.com
Realistically, you would be better off with a router/switch
This Article gives a brief definition of each.
Routers aren't quite as cheap as switches or hubs, but are available from dabs from £72 for a 4 port router
Switch or Hub... with four computers, you will enjoy a Switch more. Either will work just fine. Switch you will get 100 mb speeds and dedicated bandwidth for each port.
If they are close in price, you will be more satisfied with the Switch, but a hub will work just fine if it's cheaper.
Comready.com has nice prices on Switches. You could also search Pricewatch.com.
I agree with Putasolutions, a router is the way to go. Built in switch, hard ware firewall. Also provides built in NAT so you don't need to run ICS or winproxy on a host PC, you don't need a host PC period. I'm running a 3-com router with built it print server on my two PC LAN. I am never going back to ICS, forget that. The more clients you put on the slower your host PC will run. Especially if one or more are downloading big files.
Just one bit of clarification:
You asked, "whether I need a switch or a hub."
Either one would work, so you can't necessarily buy the "wrong" device here. But since a switch is better, and since the prices of switches are now very comparable to hubs, you may as well get the switch (or, as the above suggests, a router with a built in switch).