Memory Configuration
NOTE: The following information is meant to supersede any other information found in Hardware Maintenance Manuals or other technical documentation as of June 30, 2000.[list=1][*]Any combination of DIMM sizes, up to 128 MB, is acceptable.
[*]Only non-parity DIMMs are supported.
[*]EDO, SDRAM, or a mix of EDO/SDRAM DIMMs are supported.
[*]
If 64MB DIMMS are used, only EDO DIMMs are supported.
NOTE: 64MB SDRAM DIMMs are not supported.
[*]DIMM height must not exceed 1.2 inches.
Use
this link to determine DIMM size, speed, and type.[/list=a]