I have installed NT on 13.4 Gb HDU........
Results 1 to 5 of 5

Thread: I have installed NT on 13.4 Gb HDU........

  1. #1
    Join Date
    Sep 1999
    Location
    Italy
    Posts
    40

    I have installed NT on 13.4 Gb HDU........

    I downloaded ATAPI.SYS from Microsoft ftp site to install NT on a partition greather than 4 Gb.
    But during installation - after loading the appropriate atapi drive - I can format partition only 4 Gb (fat or ntfs).
    Where I fault?
    Thanks

  2. #2
    Join Date
    Jun 1999
    Location
    canada
    Posts
    26
    If you are formatting with fat you will still be limited to 4 gigs. However, if you installed the SP4 atapi driver you should be able to access past 8 gigs.

    ftp://ftp.microsoft.com/bussys/winnt/winnt-unsup-ed/fixes/nt40/atapi/ATAPI.EXE


    ------------------


  3. #3
    Join Date
    Jun 2000
    Location
    Stockholm, Uppland, Sweden
    Posts
    1,141
    Just a thought... NTFS partitions are first formatted FAT 16 then converted om first boot to NTFS...

    ------------------
    AMD650 Mhz, K7V, 128Mgb RAM, Matrox Millenium G400 32Mb, SBLive!, 3Com 3C905C
    Windows 98 SE + Windows NT 4.0 Workstation

    Visit our webiste! -> N-Show 2000
    AMD650 Mhz, K7V, 384Mb RAM, Matrox Millenium G400 32Mb, SBLive!, 3Com 3C905C
    Windows 98SE + Windows 2000 Pro

  4. #4
    Join Date
    Sep 1999
    Location
    Italy
    Posts
    40
    I installed the SP4 atapi driver but I not should be able to access past 4 gigs on NTFS partition.

  5. #5
    Join Date
    Sep 1999
    Location
    Italy
    Posts
    40
    I installed the SP4 atapi driver but I not should be able to access past 4 gigs on NTFS partition while formatting hd.
    thanks


    Originally posted by dek:
    If you are formatting with fat you will still be limited to 4 gigs. However, if you installed the SP4 atapi driver you should be able to access past 8 gigs.

    ftp://ftp.microsoft.com/bussys/winnt/winnt-unsup-ed/fixes/nt40/atapi/ATAPI.EXE



Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •