GeForce 2 graphics card
Page 1 of 2 12 LastLast
Results 1 to 15 of 30

Thread: GeForce 2 graphics card

  1. #1
    Join Date
    Feb 2001
    Location
    New York
    Posts
    635

    GeForce 2 graphics card

    Hello again. In the past I mentioned that as the computer is on for a while, the screen goes black or the area by the time for a sec or two, switching between user names. I thought maybe my memory may be bad so I tested it along with my hard drives. All tests came out OK. I just read that my video card is not compatible with anything over DirectX 7 and I have Direct X 9. Any truth to this? The quote being...
    "The GeForce2 series is not compatible with anything above DirectX 7"


    I have a gig of ram (the Max)
    Xp home edition
    1.99 processor

    Thanks in advance
    Tom

  2. #2
    Nix's Avatar
    Nix is offline Aka: Nix*, NNiixx, Nix23
    Join Date
    May 2001
    Location
    Sydney, Australia
    Posts
    8,255
    I used to have a Geforce2 running DX9 with no problems.

    I figured just some of the newer features would not be available.

    I just got a new machine with WinXP and an Nvidia GeForce 7300 LE and it also does that same 2 second black screen when swapping between users.

    Since this is the first time I have used XP in a multi swapable user environment I presumed that was standard ??

  3. #3
    Join Date
    Feb 2001
    Location
    New York
    Posts
    635
    Thanks Nix for the reply. I have found this problem getting worse over time. It has only been in the past 2 months or so that I find I need to reboot in order get things back the way they should. Something is getting tired or worn but I can't figure out what. The task manager shows nothing out of the ordinary. Guess I'll open it up and double check all the connections ~ Thanks
    Tom

  4. #4
    Join Date
    Apr 2000
    Location
    Sheboygan, WI
    Posts
    53,391
    I get that black out also on my rigs.


    Go into device manager and remove the video card drivers, reboot.

    See if that gets rid of that problem.

    If not then uninstall the video drivers, reboot, then do a reinstall of the drivers.

  5. #5
    Join Date
    Jun 2005
    Location
    Ft Myers FL
    Posts
    8,520
    I'd recommend buying a newer card. That 2-series card is six years old at least, probably 2x/4x. The video lag you must get showing anything other than text must be something else. Even the 5-series nVidia cards are light-years better, and you can get a 5500 for around $40. Two of the good 6-series cards can be had for $100 or less (the 6600GT and the 6800) and are Vista-capable. (The 6800 can be unlocked to equal the performance of the $170 6800GT.)

  6. #6
    Join Date
    Jul 2001
    Location
    Chicago
    Posts
    1,107
    All the directx-es up to 9 are backward compatible across hardware. What that means is that you can install DirectX9 on your PC with a directX7 video card. DX9 games will run, with reduced visible detail.

    Of course, there is no backward compatibility with DX10. But really, that's for the best. DX10 completely changes how the shaders are used and creates a new class of shader. In the batch of DX10 games that are coming, it's the software developers that will be responsible for backward compatiblity, if they want it.

    Interestingly, it will also make porting games to and from the xBox quicker and easier. How convienient! :|
    ___________________________________________

    I'm a cinematographer and director of photography in Milwaukee.
    I use Windows, OSX, and 40 TB of storage to tell stories with my
    Sony FS7 | Panasonic GH4 | 5D mark III
    Find me on Google + | Facebook | Twitter

  7. #7
    Join Date
    Feb 2001
    Location
    New York
    Posts
    635
    Thanks guys. If you were me what card would you put in? I intend to get a new machine with Vista installed in the somewhat near future. This computer however is in very good condition minus the video card (I guess). I can see spending up to a hundred for a quality card... just don't know which one.
    Running Xp home
    1 gig ram (the max)
    1.99 processor
    2 ~ 80 gig hard drives
    1 external drive
    Dell 4400
    very fast broadband connection (Optimum boost)
    anything else?

    ~ Thanks much
    Tom

  8. #8
    Join Date
    Apr 2000
    Location
    Sheboygan, WI
    Posts
    53,391

  9. #9
    Join Date
    Jun 2005
    Location
    Ft Myers FL
    Posts
    8,520
    Newer machines with Vista already installed should have appropriate on-board or add-on graphics to handle Vista (maybe not the full Aero effect, on cheaper computers). Upgrading an older one is easy and relatively inexpensive. I just recently sold an eVGA GEForce 6600GT for almost the price of a new one on eBay ($90) but I think it's because of the way I marketed it as Vista-ready, with pictures to prove it. (On the Windows Performance Index utility in Vista, this card pulled a 5.9/6.0 for all-around graphics, and a 4.6/6.0 for gaming graphics; see attachment.) This is one of the pictures I used:

    You might find a 6800 for $100-$120 if you shop around; its performance is better for gaming. If you like ATI cards, I'm sure there are a lot of devotees here to advise you on that.
    Attached Images Attached Images

  10. #10
    Join Date
    Feb 2001
    Location
    New York
    Posts
    635
    For the money I'm thinking of the
    eVGA 256-A8-N313-LX GeForce FX5500 256MB DDR AGP 4X/8X Video Card
    This should be a good step up from what I have. Correct? Or.. is it better for the extra 10.00 to get the GF6200.
    Will I see a difference? Not into gaming.


    I appreciate all the help wouldn't know what to do without Virtual Dr.
    ~ Thanks
    Tom

  11. #11
    Join Date
    Jun 2005
    Location
    Ft Myers FL
    Posts
    8,520
    If you're not into gaming and not planning on putting Vista on that machine, the 5500 will do just fine. The numbers may show a significant difference, but your eyes won't see much of a difference between it and the 6200.

  12. #12
    Join Date
    Feb 2001
    Location
    New York
    Posts
    635
    Thanks much lgbpop that's the way I'll go then. 5500 it is!
    Tom

  13. #13
    Join Date
    Feb 2001
    Location
    New York
    Posts
    635
    Hello again. I uninstalled the video driver and reinstalled. No change in preformance. I think I'll be going with the 6200 card but have a question. Do I need to be concerned with the power my PSU puts out or is that not an issue. I keep reading where it says a 350-400 power supply is needed and am afraid the standard issue supply unit from Dell may not be enough. Any thoughts?
    ~ Thanks
    Tom

  14. #14
    Join Date
    Jun 2005
    Location
    Ft Myers FL
    Posts
    8,520
    I'd be concerned with the power output, I've heard something about Dell PSUs not having much power to spare. A lot of their older components are proprietary in design, too, so not just any PSU can take its place. You should check the Dell website to see what vidcards are compatible with your computer.

  15. #15
    Join Date
    Feb 2001
    Location
    New York
    Posts
    635
    I thought so lgbpop. I found a replacement PSU and would like your opinion. It is for a Dell replacement. I don't know if I need to worry about wire connections if I go with something else that I'm sure will be cheaper. This 450 wt is 119.00. Look at the attachment please. If you think Newegg may have something that will be as easy to install please let me know
    ~ Thanks much
    Attached Images Attached Images
    Tom

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •