-
May 6th, 2017, 02:26 PM
#1
[RESOLVED] Networking XP to Win7 Ultimate
I have 2 desktop computers and one printer on my wired network, the ones in my sig. I won't even attempt getting the Win XP Home one on till this is solved. I want to share files, printer and internet. I have Verizon FIOS with Actiontec router/modem
When I marked certain files in each puter for sharing, surprisingly, the network set itself up immediately, calling itself generic "Homegroup."
I've renamed the network my old name "RSNETWORK," but when I click on it, there's the message below for this Win7 comp, saying I'm not on. I've already followed a tutorial and listed my network as "work" rather than "home, " because of the XP. Is there a difference between a homegroup and a network?
http://s1066.photobucket.com/user/ph...netw1.jpg.html
http://s1066.photobucket.com/user/ph...50374.jpg.html
---------------------------------------------------------
config:
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Prize-02>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Win7comp
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : home
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 38-60-77-9F-9E-9D
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::d03b:7f88:bfdd:32fd%10(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Friday, May 05, 2017 11:30:08 AM
Lease Expires . . . . . . . . . . : Saturday, May 06, 2017 5:54:22 PM
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 238575735
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-1F-98-4A-4A-38-60-77-9F-9E-9D
DNS Servers . . . . . . . . . . . : 192.168.1.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.home:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : home
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fb:3469:21ea:3f57:fefd(Pref
erred)
Link-local IPv6 Address . . . . . : fe80::3469:21ea:3f57:fefd%15(Preferred)
Default Gateway . . . . . . . . . : ::
NetBIOS over Tcpip. . . . . . . . : Disabled
C:\Users\Prize-02>
-----------------------------------------------------------------
The Verizon techie was here this week to reset my ONT because I had unplugged it, and he turned off my internet temporarily. I don't know if that's relevant. Before he left, we checked to see each puter had internet, but they don't handle networking.
Win7 Ult/ 3.40 GHZ Intel Core i5-3570K /ASRock mobo Z77 Pro4 /SSD/ EUFI MS 3400 MHZ/8 GB RAM; Win 7 Ult/Verizon FIOS wired network
Waterfox Classic/Chrome / Firefox 115esr
--------------------------------------------------------------------------------
"The medium is the message." - Marshall McLuhan
-
May 6th, 2017, 04:03 PM
#2
Homegroups only work for Win7 and higher. You need to use "Workgroups".
https://www.howtogeek.com/howto/wind...dows-7-and-xp/
-
May 7th, 2017, 11:48 PM
#3
OK, I followed the tutorial. Win 7 can interact with XP files. Both puters see the shared printer. On XP, I can see the names of Win 7 shared files, but I get the message "Unaccessible. You might not have permission..." Sounds like Win7's security settings again.
Win7 Ult/ 3.40 GHZ Intel Core i5-3570K /ASRock mobo Z77 Pro4 /SSD/ EUFI MS 3400 MHZ/8 GB RAM; Win 7 Ult/Verizon FIOS wired network
Waterfox Classic/Chrome / Firefox 115esr
--------------------------------------------------------------------------------
"The medium is the message." - Marshall McLuhan
-
May 8th, 2017, 01:35 AM
#4
Do you have user accounts with the same user name and password on both computers? If yes, check the permissions on the folder(s) that you want to share.
-
May 8th, 2017, 03:14 AM
#5
Which folders did you share? Post the full path of the folder.
Which users/groups did you give access to the shared folder?
Double-check the settings in the tutorial and make sure you checked all the correct options.
-
May 8th, 2017, 06:25 AM
#6
-
May 8th, 2017, 07:14 PM
#7
Originally Posted by jdc2000
Do you have user accounts with the same user name and password on both computers? If yes, check the permissions on the folder(s) that you want to share.
My instinct was right--Win 7 permissions again.
Different user names, no passwords. Would "Everyone" be the sharing permission I need on 7? Or the XP username? or the name of the XP computer?
The tutorial doesn't cover changing permissions on 7, only setting up sharing. Or am I missing it?
Last edited by foxy; May 8th, 2017 at 07:21 PM.
Win7 Ult/ 3.40 GHZ Intel Core i5-3570K /ASRock mobo Z77 Pro4 /SSD/ EUFI MS 3400 MHZ/8 GB RAM; Win 7 Ult/Verizon FIOS wired network
Waterfox Classic/Chrome / Firefox 115esr
--------------------------------------------------------------------------------
"The medium is the message." - Marshall McLuhan
-
May 8th, 2017, 07:15 PM
#8
Originally Posted by ecross
Thanks. I have no issues with XP file-sharing, after 15 years of use. I just keep it off the web. I've had Win 7 only a few months, and I'm slowly chipping away at its security settings.
Last edited by foxy; May 8th, 2017 at 07:31 PM.
Win7 Ult/ 3.40 GHZ Intel Core i5-3570K /ASRock mobo Z77 Pro4 /SSD/ EUFI MS 3400 MHZ/8 GB RAM; Win 7 Ult/Verizon FIOS wired network
Waterfox Classic/Chrome / Firefox 115esr
--------------------------------------------------------------------------------
"The medium is the message." - Marshall McLuhan
-
May 8th, 2017, 07:29 PM
#9
On XP, I'm sharing
C:\Documents and Settings\ROHP (my user name + all subfolders)
D:\ (the entire data partition)
On Win 7:
C:\Doc and Sett\Prize-02 (my username)\ (with all subfolders)
D:\ (the entire data partition)
Last edited by foxy; May 8th, 2017 at 07:31 PM.
Win7 Ult/ 3.40 GHZ Intel Core i5-3570K /ASRock mobo Z77 Pro4 /SSD/ EUFI MS 3400 MHZ/8 GB RAM; Win 7 Ult/Verizon FIOS wired network
Waterfox Classic/Chrome / Firefox 115esr
--------------------------------------------------------------------------------
"The medium is the message." - Marshall McLuhan
-
May 8th, 2017, 07:54 PM
#10
The problem is XP accessing 7, right?
On Win 7:
C:\Doc and Sett\Prize-02 (my username)\ (with all subfolders)
D:\ (the entire data partition)
There is no "Doc and Sett" in 7. That is a junction point. The actual path would be C:\Users\username\foldername
I don't recommend that you share the C:\Users\username folder, since that grants access to your profile info.
It would be better if you just shared one of the subfolders, or create a dedicated folder like C:\Shared.
You would need to add the "Everyone" group under the Security tab and then add the desired Allow permissions (Read, Read & execute, etc).
In the tutorial, it says to "turn off password protected sharing". Double-check that setting.
-
May 8th, 2017, 10:20 PM
#11
Fixed.
Am I going to have a major security issue cloning my HD to my externam HD?
Win7 Ult/ 3.40 GHZ Intel Core i5-3570K /ASRock mobo Z77 Pro4 /SSD/ EUFI MS 3400 MHZ/8 GB RAM; Win 7 Ult/Verizon FIOS wired network
Waterfox Classic/Chrome / Firefox 115esr
--------------------------------------------------------------------------------
"The medium is the message." - Marshall McLuhan
-
May 8th, 2017, 10:54 PM
#12
So what fixed it?
What do you mean by major security issue? What cloning software are you using?
-
May 9th, 2017, 12:53 AM
#13
I removed the sharing of Username, made folder C:\Shared.
I use Macrium Reflect, the last free version, and I haven't cloned this computer yet. Will Win 7 say I don't have permission to copy everything? I'm being proactive and avoiding coming back here with one more problem.
Win7 Ult/ 3.40 GHZ Intel Core i5-3570K /ASRock mobo Z77 Pro4 /SSD/ EUFI MS 3400 MHZ/8 GB RAM; Win 7 Ult/Verizon FIOS wired network
Waterfox Classic/Chrome / Firefox 115esr
--------------------------------------------------------------------------------
"The medium is the message." - Marshall McLuhan
-
May 9th, 2017, 01:04 AM
#14
You should create an IMAGE backup instead. Cloning will overwrite the external drive with a copy of your internal. I don't think that's what you want to do.
https://www.raymond.cc/blog/how-to-c...-norton-ghost/
Will Win 7 say I don't have permission to copy everything?
It shouldn't.
I'm an Acronis True Image guy, but there are others here that use Macrium. If you need help with Macrium, I suggest you create a new thread.
-
May 9th, 2017, 08:37 PM
#15
I've always used Seagate or Macrium. They're just stripped-down versions of Acronis, without the differential and incremental features. I meant imaging. Cloning will also copy 50 GB free space
Thanks to all who helped:-)
Win7 Ult/ 3.40 GHZ Intel Core i5-3570K /ASRock mobo Z77 Pro4 /SSD/ EUFI MS 3400 MHZ/8 GB RAM; Win 7 Ult/Verizon FIOS wired network
Waterfox Classic/Chrome / Firefox 115esr
--------------------------------------------------------------------------------
"The medium is the message." - Marshall McLuhan
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|