fiber network problems
Results 1 to 3 of 3

Thread: fiber network problems

  1. #1
    Join Date
    Jun 2015
    Location
    Shenzhen
    Posts
    3

    Smile fiber network problems

    Hello everyone,

    I have 2 Linksys SRW2024 switches, each with an MGBSX1 Gigabit SFP fiber transceiver installed. They are at a location with 3 buildings, and each switch is the main switch for a building. There is a fiber optic cable between the buildings. The buildings were previously linked via the fiber optic cable using 2~10Mbps Accton hubs, the Linksys units are replacements for those. However, I have not been able to get the link lights for the fiber optic transceivers to light up. Both are installed in the second slot transceiver in the switches, which should use the port 24 connection on the switch. If anyone has any ideas on what to check to get the fiber optic link working, the information would be appreciated.

    thanks!

  2. #2
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,063
    Possibly useful links, if you haven't already seen them:

    https://supportforums.cisco.com/disc...w2024-together

    http://www.neowin.net/forum/topic/12...es-with-fiber/


    Could try a different slot on one of the switches, and/or port 12 for one of them. Also, you could try testing the connection with a short patch cable and both switches next to each other.

  3. #3
    Join Date
    Jun 2015
    Location
    Shenzhen
    Posts
    3
    Thank you!

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •