-
January 2nd, 2013, 04:08 PM
#16
I went to download the ultimate boot cd but when I start what I think is the download, something else is downloading. I can't find the actual download for this software.
-
January 2nd, 2013, 05:02 PM
#17
If I go here and use Major Geeks download site it downloads fine.
http://majorgeeks.com/Ultimate_Boot_CD_d4981.html
Biostar TA790GX A2+ 6.0
AMD Phenom X4 9750 CPU.
4 Gig DDR2 Memory.
ATI HD 5450 PCIe Video
ATI HD 5450 PCIe Video
500 Watt P.S.
LG W2241T Widescreen 22" LCD
ViewSonic VA721 17" LCD
Envision 17" LCD
2 LG DVD Drives
Floppy Disk Drive
Maxtor 120 Gig Windows 7 Home Premium 32 bit
Gateway NV5378-U Windows 7 Home Premium 64 bit
Acer Aspire V3-731 Windows 7 Home Premium 64 bit
-
January 6th, 2013, 03:54 PM
#18
I made the ultimate boot cd today but do not know how to use it. I looked for instructions but cannot find anything. Am I suppose to run every line that comes up after I boot with the disk in? Please help me with instructions.
-
January 6th, 2013, 04:20 PM
#19
See Post #13--should be under the Drives or Hard Drives heading.
Biostar TA790GX A2+ 6.0
AMD Phenom X4 9750 CPU.
4 Gig DDR2 Memory.
ATI HD 5450 PCIe Video
ATI HD 5450 PCIe Video
500 Watt P.S.
LG W2241T Widescreen 22" LCD
ViewSonic VA721 17" LCD
Envision 17" LCD
2 LG DVD Drives
Floppy Disk Drive
Maxtor 120 Gig Windows 7 Home Premium 32 bit
Gateway NV5378-U Windows 7 Home Premium 64 bit
Acer Aspire V3-731 Windows 7 Home Premium 64 bit
-
January 6th, 2013, 07:59 PM
#20
I tried to run ultimate boot disk again. This time I clicked on the HDD, after that I highlighted the Hitachi choice since that is the brand name of my disk. After that, it had a list of more options in which I didn't understand what any of them are so I stopped the program and gave up. This is too advanced for me because I do not know what it is they're asking me to choose. I wish there was something else I can do other than install windows again, which seems that something went wrong when I did it last month. I think if I install it again, I will have the same problem as I know everythng went well during the last install. There were no error messages or anything that went wrong, which is just frustrating to me. If anyone has any other suggestions, I would surely try to do them.
-
January 6th, 2013, 08:57 PM
#21
Run SFC /SCANNOW. It replaces any missing files and repairs any corrupted ones.
Type CMD in the run box and whack Enter. On the screen that comes up type
SFC /SCANNOW. There's a space between the C and the /.
Biostar TA790GX A2+ 6.0
AMD Phenom X4 9750 CPU.
4 Gig DDR2 Memory.
ATI HD 5450 PCIe Video
ATI HD 5450 PCIe Video
500 Watt P.S.
LG W2241T Widescreen 22" LCD
ViewSonic VA721 17" LCD
Envision 17" LCD
2 LG DVD Drives
Floppy Disk Drive
Maxtor 120 Gig Windows 7 Home Premium 32 bit
Gateway NV5378-U Windows 7 Home Premium 64 bit
Acer Aspire V3-731 Windows 7 Home Premium 64 bit
-
January 6th, 2013, 11:56 PM
#22
I already did the scannow yesterday but nothing changed. Thanks for the help.
-
January 7th, 2013, 12:43 PM
#23
That hard drive test you did run said the drive was excellent so chances are your drive is ok. I would really run diagnostics on the memory next. Use your UBCD and run "Windows Memory Diagnostic", there shouldn't be ANY errors. Maybe run one of the others too--sometimes one will catch what the other didn't.
Biostar TA790GX A2+ 6.0
AMD Phenom X4 9750 CPU.
4 Gig DDR2 Memory.
ATI HD 5450 PCIe Video
ATI HD 5450 PCIe Video
500 Watt P.S.
LG W2241T Widescreen 22" LCD
ViewSonic VA721 17" LCD
Envision 17" LCD
2 LG DVD Drives
Floppy Disk Drive
Maxtor 120 Gig Windows 7 Home Premium 32 bit
Gateway NV5378-U Windows 7 Home Premium 64 bit
Acer Aspire V3-731 Windows 7 Home Premium 64 bit
-
January 7th, 2013, 07:58 PM
#24
I never ran the harddisk test because I don't know what to choose after picking the Hitachi choice on the first page as I described in #20. I simply do not know how to use the disk.....I am still receiving numerous errors daily in the event viewer. There are application error (IE), kernel-event tracing, customer experience improvement program, dns client events, distributedCOM, kernel PnP, service control manage, event log, security-SPP and print service. These errors seem to be the ones constantly being repeated. Does this tell you anything?
-
January 7th, 2013, 09:22 PM
#25
In Post # 8 you ran you ran some kind of Hard Drive test and it reported your drive as "Excellent" which is why I mentioned that your drive is probably ok and suggested Post #23.
Biostar TA790GX A2+ 6.0
AMD Phenom X4 9750 CPU.
4 Gig DDR2 Memory.
ATI HD 5450 PCIe Video
ATI HD 5450 PCIe Video
500 Watt P.S.
LG W2241T Widescreen 22" LCD
ViewSonic VA721 17" LCD
Envision 17" LCD
2 LG DVD Drives
Floppy Disk Drive
Maxtor 120 Gig Windows 7 Home Premium 32 bit
Gateway NV5378-U Windows 7 Home Premium 64 bit
Acer Aspire V3-731 Windows 7 Home Premium 64 bit
-
January 7th, 2013, 09:40 PM
#26
A memory test from the UBCD might be worthwhile. There is also memory test software available for Windows.
http://technet.microsoft.com/en-us/m...spotlight.aspx
-
January 7th, 2013, 10:49 PM
#27
I tried downloading the memory test software you suggested but when I open the web page and click on the link, I received this message: 404 - File or directory not found.
I did find a memory test on my computer and ran that. It reported that it didn't find anything. I can try the UBCD test from the disk I created but hope that I don't run into decisional problems as I do not know what to choose when they give me a long list of choices. I will try this tomorrow as I am short on time tonight. I found a new entry on the event viewer that occurred about an hour ago and listed 7 times. It is called :schannel". It is described as: The following fatal alert was generated: 40. The eternal error state is 107. What is that suppose to mean?
-
January 8th, 2013, 05:50 PM
#28
-
January 9th, 2013, 06:56 PM
#29
OK, I ran the memory test on Windows and it said there were no problems found. Today, when I tried to use my printer, it said that there was no printer found. I went to system restore because it worked yesterday and started to restore at a point from yesterday. I went out for a little while and when I returned, it was still on restoring. After about another hour, I shut the computer down and started it up again. I went back to system restore but now it says there are no restore points on this system. I ran my virus protection and there wasn't anything there, then I ran superantispyware and all that was found was a few tracking cookies, nothing else. My system is becoming more unstable every day. I guess I'm in touble.
-
January 9th, 2013, 07:04 PM
#30
Biostar TA790GX A2+ 6.0
AMD Phenom X4 9750 CPU.
4 Gig DDR2 Memory.
ATI HD 5450 PCIe Video
ATI HD 5450 PCIe Video
500 Watt P.S.
LG W2241T Widescreen 22" LCD
ViewSonic VA721 17" LCD
Envision 17" LCD
2 LG DVD Drives
Floppy Disk Drive
Maxtor 120 Gig Windows 7 Home Premium 32 bit
Gateway NV5378-U Windows 7 Home Premium 64 bit
Acer Aspire V3-731 Windows 7 Home Premium 64 bit
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|