DVI - no signal
Results 1 to 12 of 12

Thread: DVI - no signal

  1. #1
    Join Date
    Apr 2012
    Posts
    5

    DVI - no signal

    External monitors (tried 2 now) plugged into my laptop keep displaying a DVI No signal message (as well as video cable unplugged) and the color is all blue/greena and yellow as though it's missing red. Occasionally the right color comes through. The color is correct on the laptop screen. Ideas?

  2. #2
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,063
    Post the make and model of the laptop. I am assuming that you used the appropriate key combination to active the external monitor port.

    Welcome to VirtualDr.

  3. #3
    photolady's Avatar
    photolady is offline Lifetime Friend of Site Staff
    Join Date
    Mar 2002
    Location
    At my computer, cruising VDR and watching your back
    Posts
    23,412
    Which type are the monitors? LCD or CRT. You should try a different cable,

  4. #4
    Join Date
    Apr 2012
    Posts
    5
    I didn't try a different cable because both external monitors I tried worked with another laptop (same make and model but about 6 mos older).

    monitor is HP S2031
    laptop is Toshiba Satelite L3050

  5. #5
    Join Date
    Apr 2000
    Location
    Sheboygan, WI
    Posts
    53,392
    Have you enable the signal out put?

    http://www.microsoft.com/athome/orga...omonitors.aspx

    Mine in black until I configure the displays.

  6. #6
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,063
    I did not find an L3050 model, only an L305D. The L305D does not have a DVI port, only a VGA port. If you are using a VGA to DVI adapter, the adapter might be the problem. Try an adapter that you know works.

  7. #7
    Join Date
    Apr 2012
    Posts
    5
    I am set up for dual display so we're set there.

    RE: the VGA vs DVI - I'm not using an adapter, just the cable that came with the monitor (they sent 2 and the one I have plugged in is the only one that fits so it must be a VGA since you found that my laptop doesn't have a DVI). So the fact that it says No DVI signal must not be the problem.

    Any other ideas for what's causing the color issue are welcome

  8. #8
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,063
    The monitor may have a setup option to select the video input. Try changing that setting.

  9. #9
    Join Date
    Apr 2012
    Posts
    5
    It was originally set for DVI but I changed it to VGA. No difference.

    Someone else is suggesting the possiblity of the port on my laptop not being good. If that's it where do I buy a new port?

  10. #10
    Join Date
    Feb 2000
    Location
    Idaho Falls, Idaho, USA
    Posts
    18,063
    It is possible that the VGA port on the laptop is bad. Note: Check the port connector. A VGA connector will have 3 rows of pins, with a total of 15 pins. Also, check the cables and connectors to make sure that there are no broken or bent pins.

    If the VGA port is bad, you would probably have to replace the motherboard in the laptop. That would likely not be worth the expense - a new laptop with better specs would not cost that much more, even assuming that you could find a replacement motherboard.

  11. #11
    Join Date
    Apr 2012
    Posts
    5
    Not what I wanted to hear but I will talk with Toshiba and see if there's anything they can do. Doesn't hurt to ask

  12. #12
    Join Date
    Apr 2005
    Location
    Maryland, USA
    Posts
    17,806
    FWIW, USB-to-VGA/DVI adapters are available.

    I've used this one before, (works great):
    ENCORE External USB Video Adapter 1920x1080 (DVI / VGA) ENMUV-2 USB to DVI Interface
    $46.99 - Free Shipping (restrictions apply)
    http://www.newegg.com/Product/Produc...82E16815153012

    More: http://www.newegg.com/Product/Produc...rder=BESTMATCH

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •