Details
Product: Windows Operating System
ID: 7022
Source: Service Control Manager
Version: 5.2
Symbolic Name: EVENT_SERVICE_START_HUNG
Message: The %1 service hung on starting.
Explanation
The specified service is stuck in the start pending state. The service failed to indicate that it is making progress within the time period indicated in its last status message.
User Action
If the service does not restart, click Start, click Control Panel, click Administrative Tools, and then start the service manually. If the problem persists, contact the service vendor.
Version: 5.0
Component: System Event Log
Symbolic Name: EVENT_SERVICE_START_HUNG
Message: The %1 service hung on starting.
Explanation
The specified service is stuck in the start pending state. The service failed to indicate that it is making progress within the time period indicated in its last status message.
User Action
If the service does not restart, use Services in Control Panel\Administrative Tools to start the service manually. If the problem persists, contact the service vendor.
Related Knowledge Base articles
You can find additional information on this topic in the following Microsoft Knowledge Base articles:
• Event ID 7022 After Installing Sybase PowerDynamo 3.0
When you start your computer, the following services may not start and may record event ID 7022 messages in the System log: FTP Publishing service Network News Transport Protocol (NNTP) Simple Mail Transport Protocol (SMTP) World Wide Web...
• "The Net Logon Service Hung on Starting" Is Recorded in the System Even Log After You Run Dcpromo.exe
After you run the Dcpromo.exe tool and restart the computer, the following information may be logged in the System event log on the new domain controller: Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7022...
• XADM: Exchange Server Services Do Not Start and System Log Shows Event ID 7022
In Exchange 2000 Server, some or all Exchange Server services may not start when you restart the server. When you try to manually start the services, it may take several minutes before some of the services start. Also, you may see one or more of...
• The Removable Storage Service Hangs on Startup
After you install Windows 2000, the following error message may be displayed in the System Event log: Event Type: Error Event Source: Service Control Manager Event Category: None Event ID: 7022 Description: The Removable Storage service hung on...
• XIMS: Event ID 7022 Contains an Error in the Description
There is an error in the description for Event ID 7022, which contains the word "service" twice. If you receive the following event log error: Event ID: 7022 Source: Service Control Manager Category: None Description:The Microsoft Exchange IMAP4...
• MS DTC fails to start and logs Event ID: 4383
Microsoft Distributed Transaction Coordinator (MS DTC) fails to start, and the following event is logged in the Application Event Log: In addition, the following events are logged in the System Event Log: -and-
• PRB: Error "Service Failed to Start" When You Reboot After You Uninstall Commerce Server SP1
After you uninstall Commerce Server 2000 Service Pack 1 (SP1), you may receive the following error message every time you restart the computer: The following event is logged in the System Event Log:
• System Errors When You Open World Wide Publishing Service or Administrative Tools Services
When you try to start the World Wide Publishing Service, you may receive the following error message: In addition, when you try to open Services from Administrative Tools, you may receive the following error message: When you restart the computer, you...
• Err Msg: At Least One Service or Driver Failed During System Startup...
When you start your computer, you may receive the following error message: At least one service or driver failed during system startup. Use Event Viewer to examine the event log for details. This behavior can occur if the NetBios data value is...
• RPC, Protected Storage Services May Not Start on Workstation with Novell IntranetWare Client
When you are using the Novell IntranetWare client version 4.50 or later on a computer running Microsoft Windows NT Workstation 4.0, the protected storage service that depends on remote procedure call (RPC) service may not start and you may receive the...
• SNADDM Service Fails If Install Directory Path Is Too Long
If the path specified for the install directory for SNA Server 4.0 and OLE DB Provider for AS/400 and VSAM 1.0 is too long, the SNA DDM Service will not start properly. In one example, the path name specified during installation is 107 bytes long....
• SNMP Entry Point not Found
After you install the Simple Network Management Protocol (SNMP) service on your Windows NT 4.0 Service Pack 2 or later computer you may receive the following error message: SNMP Error - Entry point not found. The procedure entry point...
• Event ID 5774 occurs when domain controller is slow to start
A Microsoft Windows 2000 domain controller may take a long time to start, and the following events may be reported in the application event log: Event ID: 5774 Source: NETLOGON Type: Error Description: Registration of the DNS record 'DNS record'...
• Error message when you start the Front End service on a Microsoft Office Communications Server 2007 server: "error code -1007780547"
Describes a problem in which you cannot start the Front End service. Additionally, you receive an "error code -1007780547" error message.
• Hung Server Service, Event 7022 w/ Many DLC Printers Connected
When you configure your Windows NT computer to connect to many network print devices using the DLC protocol, one or both of the following symptoms occur: The following event appears in the System Log (as seen in the Event Viewer): Event ID: 7022...
• Update Available for the Background Intelligent Transfer Service
The Background Intelligent Transfer service is used by programs (such as Windows AutoUpdate) to download files by using spare bandwidth. The Background Intelligent Transfer service can maintain file transfers through network disconnections and...
• PRLNTSS.SYS Error After Applying Compaq SSD
After you install Compaq Support Software Diskette (SSD) version 1.13 or later, a Service Control Manager error may appear indicating a service or device failed to start. The system log may contain Event ID 7022 or 7026 referencing PRLNTSS.SYS....
• Error Message: Event ID 7022: The Messenger Service Hung on Starting
When you start your computer, you may receive the following error message: Service Control Manager indicates that at least one service or driver failed to start - check the Event Viewer for details. When this occurs, the following entry may be...
• Services do not start and Event ID 7022 is logged in the System log in Windows NT 4.0, Windows 2000, or Windows Server 2003
You may experience the following symptoms: When you start your computer, you may receive a message that states that one or more services did not start. If other users try to access your computer over the network, they may not be able to locate your...
• The "Preparing network connections" stage of startup takes longer than two minutes after you install security update 914388 on a Windows 2000-based computer
Describes an issue in which the Preparing network connections stage of startup takes longer than two minutes after you install security update 914388 on a Windows 2000-based computer. Provides a workaround.
• Event IDs 4318 and 4224: WINS Database Missing or Corrupt
When you restart your Windows NT server that is running Windows Internet Name Service (WINS), the following error message may be displayed: WINS could not come up due to missing/corrupt database. Restore the database using WINS Manager or...
• The User Name Mapping service does not start if the network cable is unplugged
If you start Microsoft Windows Storage Server 2003 and if the network cable is unplugged, the User Name Mapping service does not start. Additionally, the event log will register the following error messages: Error 1003: Warning - "Mapping...
• The MSExchange Transport and MSExchangeIS services do not start after a server restart
Describes an issue in which the MSExchange Transport and MSExchangeIS services do not start after a server restart.
• FIX: Windows Process Activation Service (WAS) does not start when you use the IISRESET /RESTART command to restart IIS 7.0 on a computer that is running Windows Vista or Windows Server 2008
Fixes an issue in which you have the Event 7001 and Event 7022 logged in application event log when you use the ISRESET command to restart IIS 7.0 in Windows Vista or Windows Server 2008.
• XADM: Store.exe Does Not Respond Upon Start After You Apply Service Pack 1 with a Previous Installation of an Earlier Version of Symantec Norton AntiVirus for Microsoft Exchange
When you apply Service Pack 1 (SP1) to an Exchange 2000 Server computer that also runs a version of Symantec Norton AntiVirus for Microsoft Exchange earlier than version 3.05.10.109, the Information Store service (Store.exe) may unexpectedly stop...
• IIS stops responding after you apply updates
After you apply certain updates for Microsoft Windows 2000 on a server that is running Internet Information Services (IIS), you may see the following behavior: You cannot access Web sites on the server. You cannot open the Internet Services Manager...
• Error message when you modify the "Impersonate a client after authentication" policy setting in Windows Server 2003 with Service Pack 1: "There are no more endpoints available from the endpoint mapper"
Describes a solution for a problem that occurs when services and network communication fail after you upgrade to Windows Server 2003 SP1.