-
May 18th, 2006, 12:03 PM
#1
The Volume Appears To Contain One or More Unrecoverable Problems
I have a Compaq 5320US computer running Windows XP Home. All of the sudden it would not boot into windows. It comes up with the screen where you can pick Safe Mode, Last Known Good , Start Windows Normally ect. None of these selections worked so I booted up off of the Windows XP Home cd and went into the Recovery Console. I ran CHKDSK /R It gets to 33% and gives me a message "The Volume Appears To Contain One or More Unrecoverable Problems" What do I try next?
-
May 18th, 2006, 12:47 PM
#2
Download and run the hard drive manufacturer's diagnostic utility (they run from floppy, there is no need to boot into Windows). Here are the most common ones:
Seagate Seatools
IBM / Hitachi Drive Fitness Test
Maxtor Maxblast 3
Maxtor PowerMax
Western Digital Software & Drivers
Fujitsu Utilities
Nick.
-
May 18th, 2006, 03:29 PM
#3
Ok , I need to look and see what hard drive this machine has. Once I figure that out I will give the proper utility a try. I will post back.
-
May 19th, 2006, 01:38 AM
#4
The machine has a Western Digital WD400EB hard drive. I can't even get it to boot to the Western Digital utilities floppy that I made. I even tried to make a bootable Western Digital utilities cd and that wouldn't even work. I think this hard drive is done.
-
May 19th, 2006, 02:07 AM
#5
That could be, but it should boot to the floppy or cd in any case, regardless of whether the hard disk is dead.
Could you try to unplug the hard drive and boot with the floppy or cd, just to see if that will work?
-
May 19th, 2006, 02:41 AM
#6
Originally Posted by ginky4
... so I booted up off of the Windows XP Home cd and went into the Recovery Console.
Originally Posted by ginky4
... I even tried to make a bootable Western Digital utilities cd and that wouldn't even work.
If it will boot from your Windows XP Home CD but not from your Western Digital Utilities CD, then I would suspect something is wrong with your Western Digital Utilities CD.
-
May 19th, 2006, 12:23 PM
#7
I finally got the machine to boot up off of a Western Digital Data Lifeguard floppy. I tried to run the Extended Test from the floppy that would detect and repair errors but I got a message that said. "The Drive has one or more errors that are not repairable. The final status code is 0207."
-
May 19th, 2006, 02:15 PM
#8
That should be good enough to get an RMA from WD then, and you can get the drive replaced.
Nick.
-
May 19th, 2006, 02:32 PM
#9
Looks like "207" means two different things ... dependant upon which version you were running.
Diagnostic Error Codes for Data Lifeguard Tools 11/10 and 2.8
http://support.wdc.com/techinfo/general/errorcodes.asp
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|