-
March 20th, 2006, 04:23 AM
#1
dvd-rom not being recognized
i recentlyreformatted my computer and my pioneer dvd-rom isnt being recognized i know for sure that it is hooked up right and everything. windows xp doesnt say any new hardware is found. any help would be appreciated. thanks
-
March 20th, 2006, 11:24 AM
#2
Check the Pioneer site to see if any special drivers are needed.
-
March 20th, 2006, 12:12 PM
#3
See if this fix helps, it often does the trick:
CDROM or DVD drives appear to be missing...
Nick.
-
March 20th, 2006, 05:14 PM
#4
well th eonly driver i found has to be run in dos and i dont know how to install it and suprsparks...i looked at ur link and the registry key wasnt there so i went to method 2 liek it said but there is nothing in device manager about the drive, its like ti isnt even connected, but im sure it is
-
March 20th, 2006, 06:21 PM
#5
ok update....my original ide config was i had my cd-r/rw and my hdd on the primary ide cable hdd was master cd-rom was slave and on the secondary ide i had my dvd-rom set to master no my ide config is hdd is master on primary ide cable and dvd-rom is master and cd-r/rw is slave on secodnay ide cable. the drive is now showing up and everything and working fine, but everytime i start my computer my bios screen takes a while to go thorugh startup and everytime is says Primary Slave Drive Incompatible. i tried making cd-r/rw master and dvd-rom slave but same thing happens the only way it doesnt happen is if i go back to my original ide config or disconnect the dvd-rom. i have to press f4 everytime my computer starts up now. any idea why or how to fix it? thanks for the replies
-
March 21st, 2006, 11:02 AM
#6
See what happens with the DVD drive installed as Primary Slave.
-
March 21st, 2006, 05:21 PM
#7
i did that and it just makes it so my cd-r/rw isnt even recognized like my dvd-rom was could it be a faulty ide cable?
-
March 21st, 2006, 06:09 PM
#8
Did both drives ever work ok when installed together?
-
March 21st, 2006, 07:44 PM
#9
Have you recently done a firmware update ? also re check power cables etc etc again might be a dodgy pin some where..also go to devices again click the view button above and click show hidden devices,I my self then deleted the drive,shut down,did a couple of boots with out the ROM connected,then set the ROM up again and booted up and bingo it came in..
Last edited by Believeitornot; March 21st, 2006 at 07:57 PM.
ATC Cooler Master
Intel D865GBFL/ETH/VID/AUD/6 Fans/Pen4 3.0 800 HT
2x1Gig DDr /6x2.0 usb.2 internal
WD 60GB +IBM 160GB/Floppy Drive 3.5"
Toshiba DVD/CD-ROM SD-R1202(CD-RW)
Lite-On.SOHW-1633S.DLayer/Card reader Writer 3.5"
Lcd 22" /Web cam / Cable Wireless Modem
GeForce 6000 (256 Mb) /PSU Q-Tech 550Watt
Eps scanner V350 /Eps Printer C86 PE
Lgt Trak man marble wheel
Lgt Multi func Kb usb/Creative SB Live 5.1
XP PRO SP3
Professionals built the Titanic
Amateurs built the Arc
-
March 21st, 2006, 07:51 PM
#10
yes they have worked before. theonly thing diff i did this time when i reformatted and set my comp back up was i didnt go through x-setup tweaking tool. thats the only difference i know of. and no i havent done a firmware upgrade or anything. and as for the faulty pins they have worked together and well before and i havent disconnected any of them since then. thanx for all the replies and help
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|