|
-
June 12th, 2003, 12:42 AM
#1
 Duron 1.3ghz
I have been building on this p.o.s. suped up 386 all day. All it does is get power. No screen nothing. I need to know the settings for a 1.3 ghz duron on a Soyo sy-k7ada with 2100 256m ddr single stick. Theres an albatron GeForce2 mx400 64m video card in it too. This is making me really mad. Please help.
-
June 12th, 2003, 09:42 AM
#2
If you plug in the speaker you might be able to get some beepcodes to figure out the prob.
Your manual can be found online here.
-
June 12th, 2003, 10:21 AM
#3
it should have been set to boot with that cpu from default....check the seating of your video card and ram first...then check the manual that was posted to reset the jumpers.
I have been impressed with the urgency of doing. Knowing is not enough; we must apply. Being willing is not enough; we must do.Leonardo da Vinci
Tesla's Fansite
-
June 12th, 2003, 02:05 PM
#4
the multiplier jumper has to be set to 13 and the manual only shows settings up to 12.5. with the defaults, the system does not boot. i set the core voltage jumper to 1.75. if i set the core voltage jumper to something lower like 1.3, the system beeps but does not boot. please help me!
-
June 12th, 2003, 04:14 PM
#5
Set the corev to around 1.45 perhaps 1.5 , knock the bus multiplier back to 100mhz at nominal. it'll run.
you open to a: booter make the settings and don't try to evoke windows.. (if you're trying to install windows? or from another hd? no way.. this has to be a clean install.
mach
-
June 12th, 2003, 05:07 PM
#6
when i say the computer doesn't boot, i mean it doesn't POST. i tried setting the corev to 1.45 and 1.5 and still no luck. i can't find any documentation on the internet about what jumper settings to use for this processor. i got the mobo/cpu as a combo from tiger direct, so i'm sure it'd be compatible. their costomer service seems to be just voice mail and no help at all.
-
June 12th, 2003, 05:39 PM
#7
Been talking to a guy on another forum that has problems like yours on product purchased from Tigerdirect. Perhaps you two should talk. http://www.hostclub.net/forums/showt...&threadid=7680
-
June 13th, 2003, 03:38 AM
#8
(i'm with mike here/the guy who bought it)
Why would tigerdirect sell this if it incompatible
-
June 13th, 2003, 07:48 AM
#9
Except for some of the Thoroughbred core Athlons, non of Athlons/Durons are going to run (as you found) with a vcore less than "maybe" 1.65. For your Duron 1.3 (Morgan core) you want it at around 1.75. I would simply set the board jumper to use the default vcore though. Your problem here isn't vcore related.
As for the multiplier.... On your Duron the multiplier is locked (at 13), so switch/bios changes aren't going to have any effect. I would set the jumpers to AUTO for the frequency setting (pins 1 and 2 shorted on jumpers RJ2 and RJ3 for your board). And also set the FSB to 100mhz (switch FJ1 set to 1=on, 2=on, 3=off, 4=off).
Please remember to post back whether your problem is resolved or
not, so that others may gain from the knowledge.
-
June 13th, 2003, 01:00 PM
#10
still no luck. for some reason the cdrom won't open. its getting power (the light is on). i left everything as default (auto) except FJ1. still no luck. won't post.
-
June 13th, 2003, 06:16 PM
#11
Have you tried this with just the motherboard, cpu/fan, memory and video card only? No keyboard or mouse, no drives what so ever. What size power supply?
-
June 14th, 2003, 02:02 AM
#12
ive tried everything. I think i'm just going to send it back.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Reply With Quote
