-
May 10th, 2003, 10:59 PM
#1
networkin router what
Hi, Guy's
Got my new alienware,had to give the wife my gateway. Anyway I got cable and linksys 4 port router and got them so they can both surf the internet. Can I network them together for file and printer shareing with out any more cables lol. My alienware is running win xp pro and the gateway is running win 98se. I don't want to mess up what I have workin now .
sandman
-
May 10th, 2003, 11:18 PM
#2
If the machines are connected then all you need to do is enable File and Printer sharing and then share what folders you need. Most likely, since you have cable, you'll connect the router to the cable modem and connect the machines to and from the router. But I assume since you have it working, as you say you do, then you've already connected them...
Eric
-
May 11th, 2003, 12:36 PM
#3
on the alienware xp machine you will also have to create a new user that has the exact same logon name and password as the gateway 98 machine.
I have been impressed with the urgency of doing. Knowing is not enough; we must apply. Being willing is not enough; we must do.Leonardo da Vinci
Tesla's Fansite
-
May 11th, 2003, 10:43 PM
#4
The creation on the XP machine of the user with the same name and password as on the 98 machine isn't necessary if your using simply file and print sharing (default) and haven't "disabled" (as opposed to simply "turned off") the GUEST account on the XP machine.
Please remember to post back whether your problem is resolved or
not, so that others may gain from the knowledge.
-
May 12th, 2003, 10:20 AM
#5
doc the guest account is disabled by default in XP.
I have been impressed with the urgency of doing. Knowing is not enough; we must apply. Being willing is not enough; we must do.Leonardo da Vinci
Tesla's Fansite
-
May 12th, 2003, 01:52 PM
#6
May be forgetting, but better double check that Sarr. I'm pretty sure that for a "workgroup" environment/setup Guest is "turned off (ie. so it doesn't show up as a login id) by default in Pro, but I believe it is still "enabled" (Computer Management -> Local Users and Groups -> Users -> Guest -> properties). Also (for obvious reasons ) "ForceGuest" is enabled in terms of local security policies. Again, I believe this is the case when using workgroup networking as opposed to logging on to a domain.
Last edited by DrMDJ; May 12th, 2003 at 02:18 PM.
Please remember to post back whether your problem is resolved or
not, so that others may gain from the knowledge.
-
May 12th, 2003, 04:23 PM
#7
Too many OSes, too many versions, too many installs, too many... Ugh!
Wanted to double check so... Just loaded up a clean XP SP1 Pro image, no network file sharing to start (of course). Yes, GUEST was "disabled". I usually install sharing right off the bat and could have sworn having GUEST showing "not disabled" (enabled). Hmmm. So I went ahead and (using "simple" file sharing ) just shared a drive. Lo and behold when I went back and looked GUEST had been automatically enabled by the system. Makes sense, since simple file sharing by default requires the use of GUEST for authentication. Anyway, this exercise at least explains why I was not remembering seeing GUEST disabled by default. But the bottomline is there isn't a need to create any new userids.
Last edited by DrMDJ; May 12th, 2003 at 04:38 PM.
Please remember to post back whether your problem is resolved or
not, so that others may gain from the knowledge.
-
May 13th, 2003, 09:18 PM
#8
Ok I found a good spot for help on this
and thanks guy's. I whent to www.homenethelp.com It was just what I was lookin for... Now Im off to learn
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|