Error 41: Unable to bind (in NETBIND.COM)
Hiya!
I saw another question on here about netbind.exe, so I was hoping I could get some help with my problem too.
Here's the scoop:
I want to create a DOS boot disk to connect via DHCP through an Intel 32 bit PCMCIA NIC to an NT Domain using TCP/IP.
I currently have a working NETBEUI boot disk for the PCMCIA card.
I also currently have a working DHCP boot disk for some other ISA & PCI cards that connect me to my Domain via TCP/IP.
I have included what I hope will be helpful info and files below, autoexec.bat, config.sys, protocol.ini, system.ini
If anyone has a clue about how I should go about fixing this, I'd be forever grateful! https://discussions.virtualdr.com/
Thanks,
Jeremy Carter
vizoere@yahoo.com
The following is the text I see when booting (parens show executing command):
Starting Windows 98...
Microsoft Protocol Manager version 2.1 (device=protman.dos /i:a:\NETWORK in config.sys)
Intel EtherExpress PRO/100 Mobile CardBus 32 NDIS v2.02 (980317) (device=a:\NETWORK\M32andis.exe in config.sys)
Copyright(C) 1998, Intel Corporation. All Rights Reserved.
Memory Address CC000, IRQ 10, Node Address 00A0C938E271
The command completed successfully. (NET INITIALIZE /DYNAMIC in autoexec.bat)
MS-DOS LAN Manager v2.1 Netbind (NETBIND.COM in autoexec.bat)
Microsoft Netbind version 2.1
Error: 41 Unable to bind.
NET0111: Error accesing NEMM.DOS. TCP 1.0 not loaded. (TCPTSR.EXE in autoexec.bat)
NET0111: Error accessing NEMM.DOS. Tiny RFC 1.0 not loaded. (TINYRFC.EXE in autoexec.bat)
Press any key to continue
Error 7361: (null) (NET START BASIC in autoexec.bat)
Here is my config.sys:
FILES=60
STACKS=0,0
BUFFERS=30
DOS=HIGH,UMB
DEVICE=A:\HIMEM.SYS
DEVICE=\NETWORK\IFSHLP.SYS
DEVICE=A:\NETWORK\PROTMAN.DOS /I:A:\NETWORK
DEVICE=A:\NETWORK\M32ANDIS.EXE
LASTDRIVE=Z
Here is my autoexec.bat:
@ECHO OFF
PROMPT $P$G
SET PATH=A:\;A:\NETWORK
NET INITIALIZE /DYNAMIC
NETBIND.COM
TCPTSR.EXE
TINYRFC.EXE
NET START BASIC
Here is my protocol.ini:
[network.setup]
version=0x3110
netcard=MS$M32ANDIS,1,MS$M32ANDIS,1
TRANSPORT=TCPIP,TCPIP
LANA0=NDRIVER,1,TCPIP
[protman]
DriverName=PROTMAN$
PRIORITY=MS$NDISHLP
[NDRIVER]
DRIVERNAME =INTEL$
[TCPIP]
NBSESSIONS=6
DEFAULTGATEWAY0=
DISABLEDHCP=0
DRIVERNAME=TCPIP$
BINDINGS=NDRIVER
LANABASE=0
Here is my system.ini:
[network]
FILESHARING=NO
PRINTSHARING=NO
AUTOLOGON=YES
computername=Int32MobilBoot
lanroot=a:\network
username=addws
workgroup=H8NTMSTR
LOGONDOMAIN=H8NTMSTR
reconnect=NO
dospophotkey=N
LMLOGON=1
PREFERREDREDIR=FULL
autostart=basic
MAXCONNECTIONS=8
[network drivers]
NETCARD=M32ANDIS.EXE
TRANSPORT=TCPDRV.DOS,NEMM.DOS
devdir=A:\NETWORK
LoadRMDrivers=yes