Printable View
I am trying to install a second SCSI drive into a PII system. The drives are identical. When I connect both drives and try to boot, neither drive is recognized. When I connect only one drive, everything is fine. I have an Adaptec controller.
Any Ideas??
Dude:
This souds like improper termination or improper SCSI ID setup.
The last SCSI device on a daisy chain has to be 'terminated' (a jumper must be installed on the drive which informs the system that the device is last in the chain). If the jumper is set correctly for one drive only, and you add another you will have to move the jumper on the first drive because it's no longer the last in the chain, the second drive is now last in the chain.
Each SCSI device must have a different SCSI ID. On removable drives this is set with a small dial, on fixed drives it's achieved with a jumper.
The manufacturer's web site should provide that info.
Reverend
Dude:
This souds like improper termination or improper SCSI ID setup.
The last SCSI device on a daisy chain has to be 'terminated' (a jumper must be installed on the drive which informs the system that the device is last in the chain). If the jumper is set correctly for one drive only, and you add another you will have to move the jumper on the first drive because it's no longer the last in the chain, the second drive is now last in the chain.
Each SCSI device must have a different SCSI ID. On removable drives this is set with a small dial, on fixed drives it's achieved with a jumper.
The manufacturer's web site should provide that info.
Reverend