|
Click to See Complete Forum and Search --> : I have installed NT on 13.4 Gb HDU........ EnfanTerrible October 27th, 2000, 02:58 AM I downloaded ATAPI.SYS from Microsoft ftp site to install NT on a partition greather than 4 Gb. But during installation - after loading the appropriate atapi drive - I can format partition only 4 Gb (fat or ntfs). Where I fault? Thanks dek October 27th, 2000, 10:54 AM If you are formatting with fat you will still be limited to 4 gigs. However, if you installed the SP4 atapi driver you should be able to access past 8 gigs. ftp://ftp.microsoft.com/bussys/winnt/winnt-unsup-ed/fixes/nt40/atapi/ATAPI.EXE ------------------ Qwemliis October 27th, 2000, 01:22 PM Just a thought... NTFS partitions are first formatted FAT 16 then converted om first boot to NTFS... ------------------ AMD650 Mhz, K7V, 128Mgb RAM, Matrox Millenium G400 32Mb, SBLive!, 3Com 3C905C Windows 98 SE + Windows NT 4.0 Workstation Visit our webiste! -> N-Show 2000 (http://www.n-show.nu) EnfanTerrible October 30th, 2000, 02:54 AM I installed the SP4 atapi driver but I not should be able to access past 4 gigs on NTFS partition. EnfanTerrible October 30th, 2000, 03:00 AM I installed the SP4 atapi driver but I not should be able to access past 4 gigs on NTFS partition while formatting hd. thanks Originally posted by dek: If you are formatting with fat you will still be limited to 4 gigs. However, if you installed the SP4 atapi driver you should be able to access past 8 gigs. ftp://ftp.microsoft.com/bussys/winnt/winnt-unsup-ed/fixes/nt40/atapi/ATAPI.EXE virtualdr.com
Copyright Internet.com Inc., All Rights Reserved. |
|